28
submitted 10 months ago* (last edited 10 months ago) by lindafjwj@lemmy.today to c/techsupport@lemmy.world

SOLVED by @jj122@lemmings.world

Make sure all power connections on the mb are made (there are more than just the 24 pin).

I hadn’t connected the PSU CPU cable. Now it works: https://streamable.com/9bwg1k

Also thanks guys for suggesting the dual channel slots spacing between the memories.

Thanks everyone. You're all wonderful.


See video https://streamable.com/agio65

PC SPECS:

you are viewing a single comment's thread
view the rest of the comments
[-] themoonisacheese@sh.itjust.works 5 points 10 months ago* (last edited 10 months ago)

Locate you POST diagnosis LEDs (usually top right of the motherboard). Are any of them on? If so, there's your problem. Would help to have more info like config and where you plugged everything in.

Edit: probably not your problem right now but I can tell you straight away you plugged in your ram wrong. If you only have 2 sticks, they should never be touching, to take advantage of dual-channel. Refer to your motherboards manual on how to install ram. Also refer to your motherboards manual's troubleshooti'g section, maybe there are elements you should look at mentioned there.

[-] lindafjwj@lemmy.today 2 points 10 months ago* (last edited 10 months ago)

Locate you POST diagnosis LEDs (usually top right of the motherboard). Are any of them on? If so, there’s your problem.

I found multiple supposedly LEDs both at the top right and bottom right, but none of them are on.

Would help to have more info like config

  • CPU: Intel Core i9-12900K
  • iGPU: Intel UHD Graphics 770
  • Motherboard: GIGABYTE B760M AORUS ELITE
  • Power supply unit: Corsair CV 650
  • Primary memory RAM: CORSAIR Vengeance 32GB DDR5 (2 x 16GB)
  • Secondary memory SSD: Western Digital WD BLACK SN770 M.2 2280 1TB
  • CPU Cooler: Cooler Master Hyper 212
  • Case: Corsair 220T RGB
  • Monitor: LG 24MK430H 24"
  • Keyboard: Logitech K120 USB

and where you plugged everything in.

What exactly do you mean?

you plugged in your ram wrong. If you only have 2 sticks, they should never be touching, to take advantage of dual-channel. Refer to your motherboards manual

thanks, I just set it according to mobo manual pg 15 for 2 modules

load more comments (1 replies)
this post was submitted on 07 Jan 2024
28 points (96.7% liked)

techsupport

2469 readers
10 users here now

The Lemmy community will help you with your tech problems and questions about anything here. Do not be shy, we will try to help you.

If something works or if you find a solution to your problem let us know it will be greatly apreciated.

Rules: instance rules + stay on topic

Partnered communities:

You Should Know

Reddit

Software gore

Recommendations

founded 1 year ago
MODERATORS