9
Issues using PVA with a Prusa XL (lemmy.world)
submitted 3 months ago by mortalic@lemmy.world to c/3dprinting@lemmy.world
6 comments fedilink hide all child comments

Hey all, I'm hoping someone who has dealt with this can help me out. I've got a print that would really benefit from soluble supports. I spent some time reading about using PVA picked up SainSmart PVA 500g as it was recommended on a few different places though I didn't think to check, it doesn't have a filament profile in Prusa Slicer, so maybe that was a mistake. I ended up picking the only other PVA filament profile in hopes it was close which I think was PrimaSelect PVA+ or something.

So I spent more time reading and people suggested print it around 190c. What I ended up doing is using the printing profile "soluble interface", which only puts the soluble material between the support and the print. I didn't change too many other settings (slowed down initial layer, turned off wipe tower).

What I found is that the PVA keeps triggering the filament runout sensor on the hotend, so I kept manually feeding it back in but each time it seemed to just run out again.

Additionally, the PVA would come out in big bubbles instead of thin lines. What am I doing wrong?

you are viewing a single comment's thread
view the rest of the comments
[-] mortalic@lemmy.world 2 points 3 months ago

Yeah I've done a couple prints since that one with PLA and it was flawless.

That's an interesting idea about using petg, I've got some so maybe I'll give that a try. What settings did you use for them both?

[-] huginn@feddit.it 3 points 3 months ago

If you're doing something bigger you'll want to set a raft - 85°C bed petg as the support, PLA as the main material.

Soluble support settings.

There's a whole article here - https://help.prusa3d.com/article/combining-materials-xl_498103

I'm traveling at the moment so I don't have my exact settings handy

this post was submitted on 08 Aug 2024
9 points (100.0% liked)

3DPrinting

15577 readers
59 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago
MODERATORS
andypiper@lemmy.world
j4k3@lemmy.world
henry_rowengartner@lemmy.world
GrayBackgroundMusic@lemm.ee