22
Reolink Doorbell with 2-way communication (sh.itjust.works)
submitted 11 months ago by returned@sh.itjust.works to c/homeassistant@lemmy.world
5 comments fedilink hide all child comments

Hello guys! I've tried tinkering for couple of hours to get this to work, but I haven't had much luck.

Using the Reolink Doorbell PoE camera with their official app haven't brought me much luck with it's 2-way communication... there's too much of a lag with about 5-10 seconds RTT and is often unstable. I thought it was because of my internet connection but I've gotten an FTTH recently and it's still the same.

I've managed to install HACS without issue, I've tried out the go2rtc and I wanted to get the Frigate card to work with it but with not much luck... I've tried Googling what other people have done but it can get so confusing and difficult to get some sense out of it and I end up making even less sense out of it in the end..

Did anyone had experience with it? What was your final solution to get the 2-way audio to work?

you are viewing a single comment's thread
view the rest of the comments
[-] stargazer4416@lemmy.world 2 points 11 months ago* (last edited 11 months ago)

I've bought the same doorbell 2 weeks ago, and I've slowly been integrating it into HA since then.

Got go2rtc working, and it's sending me notifications with a camera snapshot when somebody rings the doorbell. I've updated go2rtc to the latest version as well if that matters.

I also have a microphone icon in the camera/frigate view, and can hear audio, but even though i can toggle that microphone, no sound actually comes out of the doorbell.

I'm using a separate proxmox lxc container to run Frigate, HA is on a VM.

[-] returned@sh.itjust.works 1 points 11 months ago

So can you explain to me in simple terms how the Doorbell, go2rtc, Frigate and HA are operating together? So I could at least know in what direction I should try and make them work together

this post was submitted on 10 Dec 2023
22 points (95.8% liked)

homeassistant

11921 readers
89 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 1 year ago
MODERATORS
GreatAlbatross@feddit.uk