85
Strong, fast to print, and modular enclosure for a simple lab power supply (More pics in body) (lemmy.world)
submitted 1 year ago* (last edited 1 year ago) by x7tYnC6c@lemmy.world to c/3dprinting@lemmy.world
10 comments fedilink hide all child comments

cross-posted from: https://lemmy.world/post/2026026

The box is not printed as a single piece, but 6 modular plates joined with dovetail joints. Individual plates are relatively flimsy, but once assembled the box is rock solid.

This way, it is much faster to print, and is stronger since the layer lines are protected. It also let me experiment with infill for some cool effects.

Closer look at the top pattern

Front pattern

You can't see from the images, but each plate is printed without top layers, which make it even faster to print and use even less filament, compared to a vertical wall of the same weight.

The back

Gyroid air vent

top 10 comments
sorted by: hot top controversial new old
[-] Tito@feddit.nl 5 points 1 year ago

Interesting as a funcional print.

I suffer a lot for some imperfections on my prints but I see you embrace them with pride.

Congrats for the box idea, I’ll take my notes if someday could make good use of them.

[-] x7tYnC6c@lemmy.world 3 points 1 year ago

This is only a prototype, you can see there are no wiring inside. The artifacts are because I print at 150m/s and 5k acceleration, on a bed slinger.

[-] arrowww@lemmy.world 1 points 1 year ago

Do you have a link or something with the components you used for the power supply itself? I’m interested in making one for myself!

[-] x7tYnC6c@lemmy.world 2 points 1 year ago

The interface module which do everything is just the cheapest one I found locally. It called a buck boost module but that doesn't really narrow it down. Other than that it's just 2 binding posts and whatever supply you want. I used a barrel jack plug to reuse my old laptop charger.

[-] lorcster123@lemmy.world 1 points 1 year ago

Very cool. Would you be worried at all about heat?

[-] x7tYnC6c@lemmy.world 2 points 1 year ago

That's the neat thing! If passive convection can't do the job, I just have to print a new top plate with fan mount.

[-] lorcster123@lemmy.world 1 points 1 year ago

Also Im guessing you just printed the box, not the little black and red connectors, or the black piece that holds the screen or the little yellow buttons? Just wondering as I might try something similar some day.

[-] x7tYnC6c@lemmy.world 1 points 1 year ago

Yes.

[-] lorcster123@lemmy.world 1 points 1 year ago

True. Is it glued together or do the joints just hold it all together?

[-] x7tYnC6c@lemmy.world 1 points 1 year ago

It is held together completely by the joint. These dovetail joint are known to be very strong reliable.

this post was submitted on 23 Jul 2023
85 points (98.9% liked)

3DPrinting

15629 readers
249 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago
MODERATORS
andypiper@lemmy.world
j4k3@lemmy.world
henry_rowengartner@lemmy.world
GrayBackgroundMusic@lemm.ee