200
submitted 1 week ago by return2ozma@lemmy.world to c/usa@lemmy.ml
you are viewing a single comment's thread
view the rest of the comments
[-] comfy@lemmy.ml 21 points 1 week ago

It sounds to me like a professional hit. The guy used a silencer and when his gun jammed he cleared the jam and got off a couple more shots

I'm no gun expert, but this doesn't sound special or advanced. Just seems like basic research and planning after checking how previous assassinations have failed. From what I've seen there are plenty of suggestions it was amateur but reasonably-well planned.

[-] slickgoat@lemmy.world 6 points 1 week ago

I've heard that the silencer may have had an impact on the bolt returning properly. If so he may have been aware of this already as he very quickly dealt with the stoppage.

He practised, is what I'm suggesting.

[-] verdigris@lemmy.ml 2 points 1 week ago

Probably not the silencer but the use of subsonic ammo.

[-] daltotron@lemmy.ml 2 points 1 week ago

it could be the combination of the two. suppressors commonly induce failures to eject in tilting barrel designs without the use of a nielson device, and if he had used subsonics, that would also be a contributing factor to a failure to eject.

[-] inv3r510n@lemmy.world 4 points 1 week ago

The thing that makes this potentially professional isn’t the gun use but the intel needed to find this guy at the right place and time. The killer either had inside info or had been surveilling him for a while.

this post was submitted on 05 Dec 2024
200 points (100.0% liked)

United States | News & Politics

7300 readers
579 users here now

founded 4 years ago
MODERATORS