this post was submitted on 26 May 2025
135 points (94.1% liked)
Technology
72440 readers
3799 users here now
This is a most excellent place for technology news and articles.
Our Rules
- Follow the lemmy.world rules.
- Only tech related news or articles.
- Be excellent to each other!
- Mod approved content bots can post up to 10 articles per day.
- Threads asking for personal tech support may be deleted.
- Politics threads may be removed.
- No memes allowed as posts, OK to post as comments.
- Only approved bots from the list below, this includes using AI responses and summaries. To ask if your bot can be added please contact a mod.
- Check for duplicates before posting, duplicates may be removed
- Accounts 7 days and younger will have their posts automatically removed.
Approved Bots
founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Eh, not really. There is no significant difference in safety between 110vac and 230vac. Voltage is not the (most) dangerous part, it's the amps that kill if you're electrocuted.
Amps are voltage over resistance (I = V/R), volts absolutely matter, the human body has a decent resistance and the higher voltage helps burn through that.
There's a reason we talk about lethal current and not lethal voltage...30mA can kill you, even at something ridiculously low as 9V, but 5-10kV will not necessarily kill you, e.g. fences for horses will not kill you if you're electrocuted by them because there's basically no amperage. Voltage is not the determining factor in lethalness.
There is no current without voltage, what you're saying makes no sense.
Current is voltage over resistance, you get as much current as you have voltage, unless there's an artificial effect limiting voltage, like a voltage regulator or zener diode or just fet.
When you say 'it's the current', that electric fense has x volts before you touch it, and the fact that it doesn't kill you means either the voltage is too low to produce a decent current in your body, or, there's a voltage regulator/limiter that means when you touch it the voltage drops to some lower level, which I could calculate using the nominal resistance of the human body and the voltage of the fence.
In a way, the output impedance of whatever is driving the fence determines how much the voltage drops under load.
I'm speaking about the voltage needed to get the deadly current across the critical areas of your body BTW, which can be handled as a kirchoff circuit I'm sure.