Free and Open Source Software

19644 readers

89 users here now

If it's free and open source and it's also software, it can be discussed here. Subcommunity of Technology.

This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.

founded 2 years ago

MODERATORS

alyaza@beehaw.org

Gaywallet@beehaw.org

Looking to get a used router for use with libreCMC (slrpnk.net)

submitted 2 weeks ago* (last edited 2 weeks ago) by wolfyvegan@slrpnk.net to c/foss@beehaw.org

13 comments fedilink hide all child comments

I'm looking to get a used router on which to install libreCMC, but the list of supported hardware is quite short. I'd prefer to find something locally, and I doubt that I'd be able to find these particular models. However, I do not intend to use WiFi at all, so I wonder, are there any more recent routers that work 100% with libreCMC except for the WiFi? Preferably something with at least 4 Ethernet ports.

Thanks!

EDIT: What I want to know is which routers do not require any non-free firmware for any of the hardware other than the WLAN. Does anyone know of where to find such information, or how to tell based on the specifications of a router that has not actually been tested with libreCMC?

you are viewing a single comment's thread
view the rest of the comments

[–] wolfyvegan@slrpnk.net 3 points 2 weeks ago (1 children)

I don't want to run Openwrt or Tomato precisely because they include non-free firmware blobs in order to support the ac/ax WiFi chipsets, and I don't want to spend the time and effort figuring out how to remove those when the developers of libreCMC have already done that.

[–] lilith267@lemmy.blahaj.zone 1 points 1 week ago (1 children)

I think a far better option for you then is building your own router, duel ethernet nuc + cheap ethernet switch or a rasberry pi + switch would both run fine and leave some headroom for running a firewall+dns+vpn+etc

[–] wolfyvegan@slrpnk.net 1 points 1 week ago

While that sounds like an interesting project, I'm not trying to invest a lot of time and effort into this. The grass won't stop growing back while I figure it out.