this post was submitted on 11 Sep 2025
28 points (100.0% liked)

3DPrinting

19719 readers
149 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe/ may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 2 years ago
MODERATORS
andypiper@lemmy.world
j4k3@lemmy.world
GrayBackgroundMusic@lemmy.zip
28
Need some printer recommendations (sh.itjust.works)
submitted 5 days ago* (last edited 5 days ago) by neidu3@sh.itjust.works to c/3dprinting@lemmy.world
31 comments fedilink hide all child comments
 

So I've decided to get "back" into 3d printing. I was getting into it in 2012 and I started assembling a kit, but then life happened and I never had enough time or room to complete it.

However, now I'm in a much better place (both literally and figuratively), so I've decided to dive back in. However, last time around it seemed that almost everything was some variant of Prusa, and I think I want to go in a less DYI direction this time.

  • Once calibrated, doesn't need much fidgeting or maintenance.
  • More or less prefabricated. Some assembly is fine, but I don't want to sit there an dremmel a hobbled bolt again, or build a power supply.
  • I prefer one of those enclosed printers, as it will be in a location with minimal climate control.
  • Must not rely on any software that does not run on linux
  • I'm not too worried about printing speed. Print quality matters more to me.
  • Preferably one that is fixable if it breaks.
  • Single filament is fine.
  • Don't need wifi

Any suggestions?

Oh, and I still have a spool of ABS around here somewhere.. Is this still a reasonable material choice? Any other materials worth considering if I prefer the prints to be durable and not brittle?

This is where I could list a budget or preferred price range, but purchasing power parity and exchange rates probably complicates this, so let's just say "reasonably priced"

UPDATE: I ordered a Prusa Core One. I went for the kit, as I will hopefully better understand how I can fix it later after assembly. I threw in a spool of PETG as well, as I'm curious about the material.

you are viewing a single comment's thread
view the rest of the comments
[–] KingRandomGuy@lemmy.world 1 points 19 hours ago

You're correct about all of this, but it's way easier to press print than machine a part from stock. I do some machining as well (I don't own the machines, but I'm trained on the mill, lathe, and waterjet in our shop). So most of the time if I can get away with a 3d printed part, it's worth it for the time savings alone. Plus sometimes the easiest or optimal geometry to design is not something that can be machined, but can be printed.

It's specific circumstances where the basic filaments fall short, like creep and heat resistance, irrespective of print parameters. ASA and PET-CF work well in most of these spots, so I don't do anything more exotic.