this post was submitted on 09 Oct 2025
19 points (95.2% liked)

homeassistant

16534 readers
72 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago
MODERATORS
GreatAlbatross@feddit.uk
greatalbatross@lemmy.world
19
Control light without 3rd party app (mander.xyz)
submitted 1 week ago by KurtVonnegut@mander.xyz to c/homeassistant@lemmy.world
10 comments fedilink hide all child comments
 

Hi all. I recently bought a Philips hue smart plug to control a lamp.

I quite quickly realized that it was more complex than I thought.

Not only did I need to install the DIYHue add-on to simulate a Hue bridge, I also needed to download the Philips Hue app, or some 3rd party app called Hue essentials, to connect the smart plug (via the DIYHue bridge add-on?) to the home assistant?

I don't want to install any app from Philips.

Also it didn't work.

Isnt there a way to simply control a bulb or plug from the home assistant, running on a Raspberry pi, without having to install any corporate bullshit?

Sorry for the swearing. Im just frustrated that this all turned out to be so complex.

you are viewing a single comment's thread
view the rest of the comments
[–] lka1988@lemmy.dbzer0.com 8 points 5 days ago

Not only did I need to install the DIYHue add-on to simulate a Hue bridge, I also needed to download the Philips Hue app, or some 3rd party app called Hue essentials, to connect the smart plug (via the DIYHue bridge add-on?) to the home assistant?

So, here's where Home Assistant (HA) can get confusing - there are multiple ways to accomplish multiple things.

The integration you installed is meant to integrate an existing Hue ecosystem with HA. You don't have (nor want, I presume) a Hue ecosystem. You want direct control of the bulb via HA.

Phillips devices generally utilize a wireless protocol called "ZigBee". It's similar to wifi and Bluetooth in that it runs within the 2.4 GHz frequency band, but it requires a ZigBee antenna, also known as a "coordinator". One of those can be picked up for around $30, and you only need one - ZigBee is a "mesh" network. Mains-powered ZigBee devices act as repeaters to automatically expand the network. It works exceptionally well, but you will feel it if you have lots of ZigBee devices and use 2.4GHz wifi.