this post was submitted on 09 Oct 2025
19 points (95.2% liked)

homeassistant

16522 readers
40 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago
MODERATORS
 

Hi all. I recently bought a Philips hue smart plug to control a lamp.

I quite quickly realized that it was more complex than I thought.

Not only did I need to install the DIYHue add-on to simulate a Hue bridge, I also needed to download the Philips Hue app, or some 3rd party app called Hue essentials, to connect the smart plug (via the DIYHue bridge add-on?) to the home assistant?

I don't want to install any app from Philips.

Also it didn't work.

Isnt there a way to simply control a bulb or plug from the home assistant, running on a Raspberry pi, without having to install any corporate bullshit?

Sorry for the swearing. Im just frustrated that this all turned out to be so complex.

you are viewing a single comment's thread
view the rest of the comments
[–] early_riser@lemmy.world 1 points 4 days ago

You can buy a zigbee USB dongle and use the ZHA integration to control (most?) Philips Hue products. I can at least confirm their light bulbs and motion sensors work. You add them like any other zigbee device.

Thirdreality might be a better fit than Hue if you're using HA, as they advertise HA compatibility right on the product page. I started home automation with Hue bulbs right after they first came out, so my HA setup was very much brown field.

This is the zigbee dongle I use. It came in a 2-pack for some reason.