2
10Gb low power rackmount switch options?
(alien.top)
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 09 Nov 2023
2 points (100.0% liked)
Homelab
371 readers
2 users here now
Rules
- Be Civil.
- Post about your homelab, discussion of your homelab, questions you may have, or general discussion about transition your skill from the homelab to the workplace.
- No memes or potato images.
- We love detailed homelab builds, especially network diagrams!
- Report any posts that you feel should be brought to our attention.
- Please no shitposting or blogspam.
- No Referral Linking.
- Keep piracy discussion off of this community
founded 1 year ago
MODERATORS
The 6450 runs to around 25w for 24 ports, 50w for 48. The PoE model will be a bit noisier out of the box than the non-PoE, but fan swapping is fairly easy. I'm quite happy with mine.
Sounds like a 24port none poe is the one for me then! Thats only 10w more than the mikrotik
its a great switch, I have found nothing else out there to replace mine.
I did the dumb. I'm now looking to replace my non-PoE with a PoE to get rid of some injectors (I refuse to have more than one switch in an 18u rack).
me either, I ended up with 5 cameras and 4 AP's.
No risk of dying after a year either, they cost a couple of grand when they were new and they're built like tanks. If the noise of the stock fan gets to you the Sunon Maglev KDE1204PKV3 is a good replacement. You need to pop out the two outside pins and swap them because the switch uses a non-standard pinout, but that takes about 30 seconds.
Brocades definitely have a risk of dying after a year, I've got 2 6450s with about a dozen ports that only negotiate 100M now. Still nice switches though.