This project would never end and I will never get to share it! So here we go ๐ I got three switches. Two from ubiquiti(aggregate & 500w POE 48port) and one 100g mikrotik switch. Running most of my servers on 25G and primary nas/server on 100G. I even ran a fiber to my desktop for that sweet 25G laser bits. I got 4 servers. All running V4 Xeon with different levels of horse power. Two dedicated Pfsense boxes on redundant configuration. I use Proxmox as my hypervisor, then I run truenas, k3s on top of it. All of this consumes about 700w. I know it's alot and main server consumes half of it. POE switch takes 100w. Other three servers and the pfsense only consumes 300w. My next project going to getting rid of the monster but I need ton of PCI and 12bays for drive ๐ธ. Maybe I'll invest on solar instead ๐ . Feel free to ask any questions.
Is that a simplex keystone in port 2 on the second panel? Never seen anything like that before. If it is, is it preterm or how is the splice housed?
I could be completely wrong ๐
It's an LC to LC keystone. Behind the keystone, I have plugged into an outdoor rated pre made single mode fiber. That wraps around my house outside to my second floor. Why? I already had a bundle of wires going around the house, so I just made it worse by adding another ๐