this post was submitted on 21 Jun 2023
1 points (100.0% liked)

homeassistant

15533 readers
33 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 2 years ago
MODERATORS
GreatAlbatross@feddit.uk
greatalbatross@lemmy.world
1
Intel N-series fanless PC as HA host? (feddit.cl)
submitted 2 years ago by fixmycode@feddit.cl to c/homeassistant@lemmy.world
5 comments fedilink hide all child comments
 

I made a similar post on selfhosted recently but I wanted to ask if anyone has experience with these x86 fanless PCs that are sold on AliExpress and similar stores.

Particularly, I've been looking at the ones based on the N5100 Celeron processor. Brands that I've found sell similar units are x86pi and Protectil. They're normally marketed for industrial and firewall use cases. I really want to use them to run containerized HA and Plex.

I want to know how's the heat, and if you see this no-moving-parts device as a real alternative to raspberry pies. I'm allergic to fan noise (jk)

you are viewing a single comment's thread
view the rest of the comments
[–] EddyBot@feddit.de 1 points 2 years ago* (last edited 2 years ago)

I'm using an Odroid H3 with an Intel N5105 and you actually get a fan if you buy one of the bigger official Odroid Cases
which I set in the Bios settings to start at higher temperatures

so far the loudest noise is the HDD while the fan basically just runs as fallback if needed but even transcoding 4K HDR HEVC content on Jellyfin doesn't raise the SoC temperature to above 70° C (passive cooled)