My Print won't stick to the Bed[SOLVED] (lemmy.world)

submitted 11 months ago* (last edited 11 months ago) by Roflmasterbigpimp@lemmy.world to c/3dprinting@lemmy.world

32 comments fedilink hide all child comments

Thank you all for your help! After yesterday's Input I managed to Print my Box! The Problem was (mostly) the Bed temperature! The lower Bed temperature (60°C) and the now successful Firmware-Update (special thanks to DABDA) done the trick!

Thank you all for your help and your advice!

Hello I'm very new to 3D printing, I'm using a Sovol 06 with 1.75mm PLA. I'm trying to print a Box (for MTG-Cards). But everytime the bottom of the Box starts to "deatche" itself from the Bed. It starts with one corner and then progresses to the whole print. The Nozzle temperature is 200°C and the Bed temperature is 80°C. Can someone help?

you are viewing a single comment's thread
view the rest of the comments

[-] huginn@feddit.it 8 points 11 months ago* (last edited 11 months ago)

Your nozzle is way too high off the bed in this image. You need to be about 0.2mm off the bed. In this it looks like you're 1mm off or more: you can see the lines from each pass separately.

Lower your bed temp to 60c and
Redo your first layer offset/bed leveling.

Ignore people talking about glue sticks: you shouldn't ever need a glue stick with pla on a modern printer. If you use one you're doing something wrong.

[-] callcc@lemmy.world 0 points 11 months ago

This

this post was submitted on 26 Nov 2023

32 points (100.0% liked)

3DPrinting

15590 readers

63 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago

MODERATORS

andypiper@lemmy.world

j4k3@lemmy.world

henry_rowengartner@lemmy.world

GrayBackgroundMusic@lemm.ee