1

Hi there,

I am just surprised this machine I got from a refurbished sale has quite high power draw. Even when I remove all of the peripheral parts and just leave one CPU in the chassis, so remaining just:

- 1x Xeon Gold 6132 (14c/2.6 GHz, 140W TDP), 2x 32 GB RAM 2400 MHz

Even then, idling (no OS, just in UEFI mgmt.), the machine draws at least 112 Watts from the socket from which 64W go to the processor and 6 to the RAM (says iLo). The remaining 40 or so Watts are lost in the system.

When I install the 2nd CPU the CPU draw rises to ca. 120W, so I already got a good saving here.

Nevertheless I find this a bit too much, also considering some other testing labs results which seem to be significantly lower. For ex. see here, which supposedly not only shows CPU but the whole system consumption.

Do you have any explanation for this?

Thanks and cheers

-

you are viewing a single comment's thread
view the rest of the comments
[-] dergutemeister@alien.top 1 points 11 months ago

Well, now I did .. after Proxmox install, we're heading the right direction: 1 CPU installed, 2x32GB RAM (as above) plus Raid controller P408i, 8x SAS backplane and 2x 10Gb Eth. NIC it idles at 74W out of which 15W go to the CPU. With 2 CPUs we get 87W in total with 19W on the CPU.

That's a completely different story. Was not aware of this ..

this post was submitted on 28 Nov 2023
1 points (100.0% liked)

Homelab

371 readers
2 users here now

Rules

founded 1 year ago
MODERATORS