Sanity check for LiFePO4 Charger Design (voltage.vn)

submitted 11 months ago by Saigonauticon@voltage.vn to c/askelectronics@discuss.tchncs.de

17 comments fedilink hide all child comments

So, there are these great 32700 LiFePO4 batteries that showed up in my local industrial market. For like USD 2$!

However, there are no LiFePO4 chargers available. The vendors assure me I can "totally use" a 4.2V Li-ion charger, but I don't believe them (although the cells test as being in good shape).

I whipped up a 5V system with a buck converter managed by an MCU. It turns off the buck converter that charges the battery, measures the battery voltage, and if it's under 3.6V it enables the buck converter. Repeats every few 100s of milliseconds.

Did I overengineer this? Could I have just used a linear voltage regulator that outputs 3.6V (or a Zener), and a current-limited 5v power supply?

Charge speed is not really important in my application. Anything under 4 hours is great. Frankly, I'm just trying to phase out the less safe kinds of lithium cell in my lab.

you are viewing a single comment's thread
view the rest of the comments

[-] Saigonauticon@voltage.vn 7 points 11 months ago

Battery University is indeed a great resource!

However this is not a lithium polymer battery, and as it's a 32700, it is not a prismatic or pouch cell either. It is a lithium iron phosphate (LiFePO4) cylindrical battery in metal housing. Battery University does have them listed in their table of chemistries (in case you're curious), but they don't seem to have much detailed information. Enough to build a charger though :)

https://batteryuniversity.com/article/bu-216-summary-table-of-lithium-based-batteries

Also some more detailed information here:

https://batteryuniversity.com/article/bu-205-types-of-lithium-ion

Anyway, thanks for your reference in any case! I'm not responding to criticize you, only to improve the utility of this conversation in case someone else finds it on search :)

[-] tofubl@discuss.tchncs.de 3 points 11 months ago

Oh my bad. I'm no battery expert by a long shot; just meant to contribute a good source of information. But you're way ahead of me anyway. Carry on! 😊

[-] Saigonauticon@voltage.vn 3 points 11 months ago

No worries! I appreciate that you were just trying to assist!

this post was submitted on 30 Nov 2023

13 points (93.3% liked)

Ask Electronics

3173 readers

1 users here now

For questions about component-level electronic circuits, tools and equipment.

Rules

1: Be nice.

2: Be on-topic (eg: Electronic, not electrical).

3: No commercial stuff, buying, selling or valuations.

4: Be safe.

founded 1 year ago

MODERATORS

DavideAndrea@discuss.tchncs.de

linker3000@discuss.tchncs.de