14
PS1: Analog controls in Gran Turismo 1 and Colin McRae 2 (lemmy.sdf.org)
submitted 11 months ago* (last edited 11 months ago) by sjmulder@lemmy.sdf.org to c/retrogaming@lemmy.world
4 comments fedilink hide all child comments

I have the original Gran Turismo and Colin McRae Rally 2.0 for PS1 on disc, playing on a PS2 slim and PS3. On both, I can steer with the D-pad but not with the analog stick, even though both games advertise analog controls on the box.

The PS3 controller doesn't have an analog toggle button but the PS2 controller does. Pressing it enables the analog stick but it feels like it's still digital.

How is this supposed to work?

you are viewing a single comment's thread
view the rest of the comments
[-] Alabaster_Mango@lemmy.ca 6 points 11 months ago* (last edited 11 months ago)

Here's a form post that goes into it.

Make sure you have analog button enabled on your controller. Go to options. You have to press "Select" (if I recall correctly) in the controller config screen (it should tell you at the top of the screen). Then you select "Steering" and press left/right on the d-pad to select analog/digital steering.

Disclaimer: I haven't had to do this in years, but that sounds familiar.

[-] sjmulder@lemmy.sdf.org 2 points 11 months ago

Thanks! And for CMR 2 it turns out it was working fine, the PS2 analog stick is just a bit more primitive to what we're used to now. But much better than digital in any case!

this post was submitted on 04 Dec 2023
14 points (100.0% liked)

RetroGaming

19541 readers
121 users here now

Vintage gaming community.

Rules:

  1. Be kind.
  2. No spam or soliciting for money.
  3. No racism or other bigotry allowed.
  4. Obviously nothing illegal.

If you see these please report them.

founded 1 year ago
MODERATORS
Xylinna@lemmy.world
Tenthrow@lemmy.world
gts@lemmy.world