7
Laptop DIY
(lemmy.zip)
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 07 Dec 2023
7 points (100.0% liked)
Do It Yourself
7718 readers
1 users here now
Make it, Fix it, Renovate it, Rehabilitate it - as long as you’ve done some part of it yourself, share!
Especially for gardening related or specific do-it-yourself projects, see also the Nature and Gardening community. For more creative-minded projects, see also the Creative community.
This community's icon was made by Aaron Schneider, under the CC-BY-NC-SA 4.0 license.
founded 2 years ago
MODERATORS
The absolute easiest way would be to 3D print the whole thing, leaving slots for steel rods to reinforce the frame.
The cooler way would be to just 3D print the rim and make the back and front plates out of laser-cut aluminum. There are laser-cutting services if you don't have one of your own.
If you don't have access to a 3D printer, you might consider brass. Unlike aluminum, brass can be folded or hammered into shape, so the front and sides of the tablet could be made from one folded and soldered/brazed sheet, with ports and vents cut with hand tools. I wouldn't call this easier though -- you'll need some practice to keep it from looking sloppy.
I'd recommend taking some inspiration from cyberdeck builds and other custom electronics enclosures. https://youtu.be/qzEd50uzdF0?si=6Bk1-QPlVcoNRcVO https://youtu.be/DrqdHVeBkp4?si=1sqfqUsp66He2bS5