7
Help troubleshooting issue with Mega Drive controller (lemmy.ml)
submitted 9 months ago by InFerNo@lemmy.ml to c/consolerepair@lemmy.world
4 comments fedilink hide all child comments

I have a "Professional control pad PRO-2" (this one https://segaretro.org/Konix_Power_Pad), but unfortunately it does not work.

When I open it up and toy with the contacts I can get all the buttons to work at the same time, and indefinitely, by bridging the start button contact with a single piece of metal. The 3 lights will go on and stay on, and the game will keep receiving start repeatedly. I have tested this with Virtua Racing, it will start the game, go through all menus and then when the race starts it will pause and continue repeatedly. When I touch both sides of the start button contact with a multimeter it does nothing.

I don't know much about electronics, but I would like to repair this controller.

Here are pictures of the inside of the controllers.

https://imgur.com/a/WTQsCIt

I'm not seeing anything wrong, and the capacitors don't look leaky, but I could replace them. How can I best proceed?

you are viewing a single comment's thread
view the rest of the comments
[-] v1605@lemmy.world 1 points 9 months ago

The no continuity is expected. You would only get a beep if the button is pressed (the press happens when both sides are connected by a conductor, which in the case here is the carbon on the button membranes). It could be the contacts are just dirty and cleaning them with a q-tip and ipa is good enough. I would also lightly clean the membranes as well to make sure there is no dust or residue on them (the carbon on the button will always come off on the qtip, so just lightly clean that part).

[-] InFerNo@lemmy.ml 1 points 9 months ago

I have already cleaned the contacts and the membranes. How would I go about tracing where the problem lies? I know there's no continuity when the button isn't pressed, but nothing happens when I bridge any of the buttons, either with the membrane or otherwise, with the exception of the start button, which then seems to trigger all the buttons continuously (judging by the leds).

[-] v1605@lemmy.world 1 points 9 months ago

It's really odd you wouldn't get continuity even using metal across the buttons. That seems like a physical issue with those contacts.

[-] InFerNo@lemmy.ml 1 points 9 months ago

Do you know how I can proceed tracing where the issue lies? Power is applied, as I can get the leds to light up.

this post was submitted on 31 Jan 2024
7 points (100.0% liked)

Console Repair

563 readers
2 users here now

Anything and everything about retro and modern console repair.

If you've got a broken gaming console you are trying to fix, come here to talk about it. If you want to flex about a repair, post here. If you or your console's last lover did a non-destructive electronic mod to their console, or have a question about the options available or how to do it, you are welcome to post here.

If you suck at soldering, we still love you, but we might roast you.

If you did an extreme modification such as turning one of the few Nintendo Playstations into a Rubik's Cube, flex elsewhere. If you're trying to FIX a Nintendo Playstation that someone turned into a Rubik's Cube, post away!

Other great places:

Console Repair Discord

!retrogaming@lemmy.world

!retrocomputers@lemmy.world

founded 1 year ago
MODERATORS
DarthBueller@lemmy.world
v1605@lemmy.world