submitted 1 year ago* (last edited 1 year ago) by ArchTemperedKoala@lemmy.world to c/3dprinting@lemmy.world

6 comments fedilink hide all child comments

So I printed this Horsea from printables here, and came back to this.. Removed the supports and it looks like this.. Additional pic in comments.

Is this a faulty model? I sure fixed it with netfabb before slicing..

Is this something error while slicing? I'll reslicing try later maybe..

Did something happened to the Z axis? Is there not enough support?

This was printed on my Prusa Mini+ with bondtech extruder and revo micro hotend, 0.3 mm layer height with 0.6 nozzle, temp 235. Filament is Polymaker Polyflex.

Any help is appreciated..!

top 6 comments

sorted by: hot top controversial new old

[-] TomFrost@lemmy.world 6 points 1 year ago

This is tough to diagnose without seeing how it was sliced. Could you take a screenshot of the model in your slicer, using the view that shows what it looks like after being sliced?

[-] pmtriste@lemmy.world 5 points 1 year ago

Looks to me like you had a delamination. Then it just squirted unconnected plastic after that. Sure you got the temperature right? Nothing might have caused your line to feed incorrectly for a minute? Last time it happened to me it was because there was too much drag on the feed. It had fallen off the bearing onto a screw, which let it keep feeding, but with extra drag.

[-] ArchTemperedKoala@lemmy.world 0 points 1 year ago

Hmm no problems with temps so far, this is near the end of the spool, one small print later it's almost gone..

Maybe that's what causing it, somehow it got snagged on itself near the end but got resolved eventually and continued on..

I should really print a camera mount next haha

[-] nyan@lemmy.cafe 5 points 1 year ago

Spaghetti blob. Could be delamination, as has already been pointed out, but the one or two times I've had this happen, it's because the nozzle caught a raised drip-blob or slightly warped edge on the unfinished print and gave it a shove, then continued printing in thin air.

[-] ArchTemperedKoala@lemmy.world 2 points 1 year ago

[-] EnterOne@lemmy.world 2 points 1 year ago

Horrifying

this post was submitted on 06 Jul 2023

19 points (91.3% liked)

3DPrinting

15629 readers

345 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago

MODERATORS

andypiper@lemmy.world

j4k3@lemmy.world

henry_rowengartner@lemmy.world

GrayBackgroundMusic@lemm.ee