Need help removing triangles in PrusaSlicer (lemmy.world)

submitted 1 year ago by Xzi@lemmy.world to c/3dprinting@lemmy.world

18 comments fedilink hide all child comments

Hey y'all. I am trying to do a max perimeter style print, and want to know how to remove these smaller sections. I know I could reduce wall count until I remove them, however that isnt dynamic, and leaves larger gaps than I want in other areas. Is there a setting in PrusaSlicer im missing? I messed around with a few but they didnt give me the results I was looking for.

top 17 comments

sorted by: hot top controversial new old

[-] JustALeatherBoot@vlemmy.net 6 points 1 year ago

Why do you want to remove them?

[-] Xzi@lemmy.world 2 points 1 year ago

They dramatically increase print times and increase blemishes. It's such a small surface area, that it just ends up creating blobs and shakes the printer.

[-] Flaky_Fish69@kbin.social 2 points 1 year ago* (last edited 1 year ago)

If you’re finding you’re printer is shaking too much, consider adjusting the acceleration/jerk settings

it’ll slow prints down- the maximum axcel/jerk will limit the top speed for the very short moves, longer moves remain mostly unaffected- but it will improve print quality.

[-] Xzi@lemmy.world 3 points 1 year ago

I probably should adjust the acceleration settings. In this instance, Im just trying to optimize the print to cut down on print time. There's about 15 or so of these needlessly small sections per layer, so culling them would cut down the print time a bit.

[-] david@l.vidja.social 4 points 1 year ago

The triangles are a result of the print "wall" changing thickness. Look at the corner on the left. All 10 perimeter lines go all the way round. If 10 go in and 10 come out, we need extra perimeter lines in the corner to fill the extra width. That's why there are triangles.

I imagine you could fix this by making the walls the same thickness at all points, but without trying I can't be sure.

[-] kek_w_lol@lemmy.one 3 points 1 year ago

Can't you make the infill concentric? That should help.

[-] rikudou 4 points 1 year ago

Isn't that possible only for top/bottom layer?

[-] kek_w_lol@lemmy.one 2 points 1 year ago* (last edited 1 year ago)

Set top and bottom solid layers to 1. Set infill to concentric and then set infill percentage to 100%.

It should get rid of most triangles.

[-] Xzi@lemmy.world 2 points 1 year ago

Unfortunately that has the same issue as well. These triangles are due to the 3 closest perimeter lines meeting, thus concentric ends up with the same issue.

[-] kek_w_lol@lemmy.one 0 points 1 year ago

Then I am afraid you can't eliminate all triangles. If you had an extruder with variable extrusion width, then it might have worked. Why are you trying to eliminate the triangles anyway?

[-] Xzi@lemmy.world 3 points 1 year ago

Yellow is perimeter lines, the goal is to not use infill at all, and to just use multiple perimeter passes.

[-] buckykat@lemmy.fmhy.ml 1 points 1 year ago

Why?

[-] Xzi@lemmy.world 3 points 1 year ago

Direction specific force loading. In this particular instance, Having it run the infill along the perimeter of the part would improve it.

[-] Spott@lemmy.world 2 points 1 year ago

If this is a one off, you could try manually removing the lines of gcode for those traces. Though this would get tiresome if you wanted to do this a lot.

load more comments

this post was submitted on 03 Jul 2023

32 points (100.0% liked)

3DPrinting

15561 readers

186 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago

MODERATORS

andypiper@lemmy.world

j4k3@lemmy.world

henry_rowengartner@lemmy.world

GrayBackgroundMusic@lemm.ee