Never use a case but always use a screen protector as replacing the screen often costs almost as much as a new phone.
No Stupid Questions
No such thing. Ask away!
!nostupidquestions is a community dedicated to being helpful and answering each others' questions on various topics.
The rules for posting and commenting, besides the rules defined here for lemmy.world, are as follows:
Rules (interactive)
Rule 1- All posts must be legitimate questions. All post titles must include a question.
All posts must be legitimate questions, and all post titles must include a question. Questions that are joke or trolling questions, memes, song lyrics as title, etc. are not allowed here. See Rule 6 for all exceptions.
Rule 2- Your question subject cannot be illegal or NSFW material.
Your question subject cannot be illegal or NSFW material. You will be warned first, banned second.
Rule 3- Do not seek mental, medical and professional help here.
Do not seek mental, medical and professional help here. Breaking this rule will not get you or your post removed, but it will put you at risk, and possibly in danger.
Rule 4- No self promotion or upvote-farming of any kind.
That's it.
Rule 5- No baiting or sealioning or promoting an agenda.
Questions which, instead of being of an innocuous nature, are specifically intended (based on reports and in the opinion of our crack moderation team) to bait users into ideological wars on charged political topics will be removed and the authors warned - or banned - depending on severity.
Rule 6- Regarding META posts and joke questions.
Provided it is about the community itself, you may post non-question posts using the [META] tag on your post title.
On fridays, you are allowed to post meme and troll questions, on the condition that it's in text format only, and conforms with our other rules. These posts MUST include the [NSQ Friday] tag in their title.
If you post a serious question on friday and are looking only for legitimate answers, then please include the [Serious] tag on your post. Irrelevant replies will then be removed by moderators.
Rule 7- You can't intentionally annoy, mock, or harass other members.
If you intentionally annoy, mock, harass, or discriminate against any individual member, you will be removed.
Likewise, if you are a member, sympathiser or a resemblant of a movement that is known to largely hate, mock, discriminate against, and/or want to take lives of a group of people, and you were provably vocal about your hate, then you will be banned on sight.
Rule 8- All comments should try to stay relevant to their parent content.
Rule 9- Reposts from other platforms are not allowed.
Let everyone have their own content.
Rule 10- Majority of bots aren't allowed to participate here. This includes using AI responses and summaries.
Credits
Our breathtaking icon was bestowed upon us by @Cevilia!
The greatest banner of all time: by @TheOneWithTheHair!
I don't use a case, pretty much for exactly the same reasons mentioned in the old collegehumor video https://youtu.be/q4yIWg_LElc I gave up using a case several years ago and still have never had an issue
Just once and shattered my screen when the vibration motor knocked the phone of a table. 100€ later and a lot wiser, I am fully geared up.
I bought the galaxy fold 3 when it came out and stopped using cases or screen protectors about a year ago when I realized I never drop my phone (knock on wood). This phone can be pretty thick with a case added so I prefer it this way.
I 3D printed my phone case. I had considered going without a case, but the Snap 4 Luxe, which I absolutely love, adheres better to cases than the bare phone. That could be my fault, maybe I didn’t clean the phone or adhesive properly, but if I have the phone on a magnet sometimes the Snap stays behind.
So I found a case design someone else made, brought it into Blender (because I don’t know CAD), thickened the back to the same distance as the Snap, then made a hole for the Snap and made sure to include a lip to cover over its curved bezel. I printed the first few layers in a tough 68D TPU, then switched to a 95A TPU for the rest. The tough layers and the lip keep the Snap held to the phone even when the adhesive fails, and the softer TPU makes the case easy to put on and remove.
(This is like, my seventh iteration of this case, and it sure seems flawless for the past few weeks.)
This lets me use the Snap with as little wireless charging distance as possible. I found that some cases added to the inherent 2.5mm of the Snap are just too much distance to reliably charge using weaker qi chargers. With this setup I can wirelessly charge much more reliably! And since I thickened the back of the case, the magnets on the Snap now sit flush with the rest of the back, making qi2-based external batteries more manageable.
Get the loctite glass glue and place a few dots around to help with adhesion but nott too much that it is permanent when you want to remove it.
I personally sprung for the ESR magsafe hololock ring because I wanted it to be as flush as possible on my Samsung S25 Ultra. Being slim but still help with attaching to magsafe products is nice, especially since I live in a place that gets hot, I bought a qi2 car charger that has a peltier cooling unit in it. Phone is ice cold when I slide it off the charger
Side note:
popping it perpendicular to the surface has shown me that without the loctite glass glue, the ESR magnet ring will stay on the charger. So I just make sure to slide it off horizontally.
I did the perpendicular thing for a while, but two of the magnets I use with the phone (one a charger, one just a mount) are strong enough that removing the phone perpendicularly is difficult.
If I ever decide I don’t want my printed case, I’ll try the loctite solution! Thanks!
Yes. Savages.
I believe that if a phone would've needed a case/screen protector, it would had it just built in (i.e. made the actual phone casing/screen stronger). And that's what modern phones have: gorilla glass, metal in the casing etc.
I use a phone w/o a case, I dropped it multiple times, its metal bezels have successfully protected it so far - the screen hasn't cracked.
No, because even cheap smart phones are often expensive and difficult to repair. My current phone is an s10 ive had since 2020 and even today it would cost me £50 to replace the screen myself.
I refuse to treat my phone as disposable so when i very rarely buy a new phone, ill buy one that i could repair myself and with internals that will last a long time.
Budget phones are usually out for me because they usually become annoyingly slow after only a few years which means i usually end up spending more for a mid range which means repairs cost more if i need them. Therefore putting a decent case on it makes sense.
I have used a case on the last three phones, all Samsung, because they seem to be of a form factor intended to have a case. I find the naked phone to be a bit thing and slippery, so I get a case that doesn't add a lot of thickness but has a rubbery kind of texture and slap a pop socket on the back to make it even easier to keep in my hand as I'm a bit clumsy and fumble stuff.
No screen protector though. Only cracked the corners of one phone that was in a flip case by fumbling it onto rough concrete sideways and the cover flipped open. No issues with the phones since with just a back and edge protector despite dropping it a number of times.
I have a had a Samsung fold since it came out so yeah
I left my phone fall for the firsr tine when I was in line to pay for it. I could never not use a case.
My friend Greg does. I don’t get it.
I don't get u
I stopped using a case a couple phones ago. Haven't broken anything yet and my last phone was 7 when it stopped getting security updates and I had to move on.
My wife always uses a case and screen protector and has still broken more than one.
I don't have a case on my work phone. I carry two phones so I don't need the extra bulk and if it breaks oh no I have to get a newer phone!
I used to but now I'm using a very thin case from Latercase. I'd say cases are the norm.
I used a Dbrand skin for awhile.
I do, cuz i got a quadlock mount for it on my bike
I use one because it had one in the box. Otherwise, I would've purchased one since the back is prone to scratches and degradation. It also adds a level of protection to the phone.
I didn't for a long time, but I did eventually get the most basic, thinnest black rubber "sleeve" I could fine just to prevent basic slipping. Nothing to protect falling really.
I don't use protective cases with any of my phones. I've read that phone cases can cause them to overheat, as they trap the heat in and seeing that my phones already get pretty hot after most gaming sessions, I just don't use them.
I do, however, have pop sockets for all of my phones and when I leave the house, I always carry my phones in a purse when I'm not using them.
Just trying interstellar on PieFed. Says 119 comments but only see four. Also not sure what profile name it'll use as I have two on one email address. (edit - it picked my old one.)
No case. Dropped and cracked my screen after 15 months. Ordered a new screen on mobilehq and will install next week. I prefer the lightness and the soft back of my g84.
.. And now on the PWA the username it shows is my new one, and all comments visible. I think Interstellar needs more work.
I change it depending if i feel like it or not.
If something breaks its like at most a 90€ replacement part
Bought a repairable phone and only use a screen protector now. If it were to break it's not that expensive a repair (never paid more than $500 for a phone anyways, seems ridiculous to me), and I've dropped it plenty of times and it hasn't broken yet in nearly 4 years. Doesn't seem necessary.
I don't use one, though my phone is second hand and I charge it wirelessly. A case would make it change worse
I use a case to add magsafe to my android phone, because I like the magnetic holder/charger idea ,na swish all phones had it built in.
I have a cheap, clear magsafe case for my Pixel 9.
I also have a screen protector, and when I have the phone out of the case, it feels weird in my hand when I brush the edge of the screen protector.