IT'S DONE! Went and got myself a new SSD this afternoon and put POP!_OS on it. Looks like I got it all right but I can only boot into my Windows11 side through the BIOS. I tried all the GRUB commands but apparently after more reading GRUB isn't used in pop 22.04. Any other ways to have a selection screen of some sort for the OS I want to boot rather than having to wait for the splash and frantically hit "F2" at the right time?

If you want to dual boot Windows, do yourself a favor and get a second SSD to run Linux from. It'll save you a lot of headaches.

PopOS is a solid choice. Other good choices are Mint or Zorin. But don't sweat it too much. Just pick something and go with it. Once you get into it more, you'll either know exactly what you want or you'll stop caring.

I've been dual booting between Linux and Windows for maybe 10 years or so (and tinkered with linux growing up before that). I think maybe similar to you, I'm technically apt when it comes to computers but not a programmer; I'm good at problem solving issues with my computer and am not afraid to "break" it.

A few key things:

• Make sure your important personal data, files etc are kept secure and always backed up. This is probably obvious, but it does lower the threshold for tinkering and messing with the computer. I've reinstalled Windows and Linux multiple times; whether that's getting round broken Windows updates, or Linux issues or just switching up which Linux distro I use. If you are confident you have your data backed up, then reinstalling an OS is not a big deal
• Use multiple drives; don't just partition one drive. Ideally each OS gets it's own SSD; this will make dual booting much easier and also allows complete separation of issues. I have 4 hard drives in my PC currently - A 1TB C Drive SSD for Windows, a 500 GB Linux SSD drive, and two 4TB data drives (one is SSD one is just a standard HD). SSD is faster but you can of course use a mechnical drive if you want.
• When it comes to dual booting, if you have a separate linux hard drive, then linux will only mess around with it's own boot sectors. It will just point at the Windows boot sector on the windows hard drive and not touch it but add it as an option to it's boot menu. Then all you have to do is go into your Bios and tell it to boot the Linux drive first, which will get you a boot menu to chose between Linux and Windows. Tinker with that boot menu (Grub2 usually) - I set mine to always boot the last OS selected, so I only have to think about the boot menu when I'm wanting to switch. Separate drives saves you having to mess around with Windows recovery disks if things go wrong with the boot sector. One drive with a shared or multiple boot sectors can be messy.
• Try a few Distros using their live images. Most Linux distros you flash onto a USB stick, boot onto that (OR use VirtualBox in Windows to try Linux in an emulated environment) and it takes you into the full desktop environment running from the stick. You can then install from that. But you can also use linux that way. You can even run linux entirely from those USB sticks (or an external drive) and get a feel for it, including installing more apps, upgrading etc all using the USB stick as storage.
• Also try a few different different desktop environments and get a feel for which one you like. Most distros default to a desktop environment (Gnome, KDE, Cinnamon, etc). You only really need to test the desktop environments with one distro as they'll feel mostly the same in each distro.

If you know you want to use Pop_OS, then follow their guide on how to install. It's generally very similar for all linux OSs (there are other methods but this is the simplest and most common):

1. Download a disk image (ISO)
2. Flash the disk image onto a spare USB stick. Balena Etcher is a very commonly used tool for this.
3. Restart your computer and go into your bios (usually the Del key just after reboot, sometimes Escape or F2) and change the boot order to that USB is 1st, above your hard drives
4. Insert the USB stick and restart the computer
5. You should load into the Linux live environment set up by that distro. Pop_OS loads you directly into the installer; you can go to the desktop by clicking "Try Demo Mode" after setting up langauge and keyboard. You can just continue installing.
6. Select the hard drive you want to install onto. BE CAREFUL at this step; most installers are good at making clear which drives are which. The last thing you want to do is wipe a data drive or your main OS. Know your computer's drives well, and if in doubt the safest thing is to unplug all the hard drives except the one you're going to install Linux onto.
7. Follow the installer set up (to create the main user account, etc) and install.
8. After installing reboot the system and go back into the bios. This time put your linux drive at the top of the boot order (or below USB if you still want to boot other live images - remember to take out the stick! But generally more secure to boot to a hard drive and password protect your bios so people can only boot to USB when you decide). That's it! Reboot, and select linux from the new boot menu.

Linux has come a very long when it comes to installing and setting up; installers are generally easy to use, work well and generally hardware is recognised and set up for you. The exception will be the Nvidia graphics card - you will need to set up the Nvidia drivers. Pop_OS's install guide shows how to do it.

Hope that helps! Run out of characters!

Welcome aboard! There is no need to be a programmer to work on Linux. I'm no programmer either and have been enjoying Linux for many years.

About the distro, it's a conversation ad old as the first fork lol. It depends in part what you want to do with it. I've used many in 20+ years. I've settled eith endeavourOS for my desktop (after a few years of Linux Mint) and debian on the servers. I play and work on it without any problems (although I have a radeon rx580 card).

I've never used popOS, but all major distros have a fairly simple install process, especially if you use the whole hd and don't need fancy config. Or you can start relatively hard and use gentoo. It will take a while (and thanks the fact that stage1 is not the default anymore) but you'll learn a lot of how linux works.

Feel free to ask if you want to know more.

Yeah go with Pop. You'll have a much easier time with the transition using it. Be sure you get the Nvidia version.

Pop_os is a good choice. It's a solid distro and a good introduction to Linux. You can distro hop later, start with something easy for now. I installed it as a dual boot in case I needed Windows for something, but this is the first distro I haven't felt the need to switch back.

Others have posted way more in-depth responses so I'm just here to provide some encouragement!

It looks like you've done your research if you've decided on pop. I personally use Fedora but I also don't do much gaming so my needs are better met by it. Once you've gotten used to Linux, you'll realize how little of a difference there actually is between most distros so don't sweat it too much.

I wish you luck in your endeavors (pun intended) and I hope you find it suits your needs!

I have been running Pop!_OS for a couple months (Linux in general), it's been rock solid! I had it running dual booted with Windows for about 1.5 months and had no issues. Nvidia drivers also just work really well.

I've been looking around to see if the grass is greener on the other side with other distros, but I keep coming back to Pop!_OS. I'm also super excited about their new Desktop Environment (DE) coming later this year.

EDIT: System76 (the people who make Pop) have some really good articles/docs on installing and using Pop - installing Pop!_OS, TechHut Video on dual booting & piped version

There are distros that make it easy for non-techies to install and manage Linux, and if you have any computer aptitude at all, it should be pretty easy. The devil is in the details; if all your hardware is well supported, there's no reason why you should ever have to open a shell. Trouble usually happens with peripherals like printers and some extremely protective vendor chips like Broadcom. In those cases, it's usually still possible to make things work, but it can require researching, finding, reading how-tos, downloading, compiling and installing software.

I think 99% of trouble I've ever had in the past 20 years has been with printers+scanners or Broadcom chips - they're very common. I read about people having issues with graphics cards, but that seems to be mainly Nvidia; I've only ever had Intel or Radeon, and haven't had trouble with graphics cards in the past decade or so, myself.

Anyway, my advice is to do some distro hopping before you settle on one. Boot from a USB stick for a while; it'll be a bit slower, but it'll make playing with different desktop environments and distributions easier, before you commit.

Just pick one and roll with it. Eventually as you use it you might want to switch so do that if you wanna. Distro just comes down to preference so find one you like. At the end of the day they're all Linux

Linux Mint Debian!! It's simple, already set up, easily extensible, and is based on one of the most popular distributions. You can always find out how to do something on Debian and it won't break on you.

It's more important to make the swap in the first place than it is to pick the right distro, unless you dive straight into LFS or Gentoo or something. You'll eventually find what you want and can swap easily enough, or you'll find that you're happy with what you have!

I've had serious trouble with pop and usb devices waking up from sleep. Tried for weeks. Also had trouble with many flatpacks. Most help pages and tutorials were outdated or plain wrong, too.

Changed to arch eventually. Never regretted it. Mostly coding and gaming. Eventually deleted windows, because, well, everything just worked. I must have reinstalled pop like eight times. Am still sporting the first arch installation. Well. EndeavourOS, really.

I am no programmer either, mainly a technical-oriented user, and I made the switch to a linux-only desktop almost 20 years ago. I tried several distros but I keep coming back to ubuntu (in vanilla gnome mode), with it's closeness to debian and huge library of apps, with it's massive userbase you get a lot of online community support, and it's really polished these days. For the last 5-6 years or so I've been using "LTS" releases, doing major updates every two years, I found that to be a very reasonable cadence and it gives you great environment stability. The only significant downside I found these days is ubuntu's insistence in using their (proprietary?) snap desktop container app ecosystem, I personally much prefer flatpaks, and actually I use flatpaks extensively on my ubuntu desktop for SW that needs frequent updating (darktable, logseq, etc)

I recommend Linux Mint for every beginner, it's the friendliest distro for new users and the user interface is great for people used to Windows.

And as someone else mentioned, use flatpak as much as you can (unless you have a tiny harddrive).

What are people’s experiences with dual booting windows and one of the Linux distros from the same SSD (different partitions) as opposed to having two physically separate SSDs? I unfortunately don’t have another M.2 slot on my mobo