this post was submitted on 15 Aug 2024
365 points (98.7% liked)
3DPrinting
15590 readers
137 users here now
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at:
!functionalprint@kbin.social
or !functionalprint@fedia.io
There are CAD communities available at:
!cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
founded 1 year ago
MODERATORS
If the infill is enough to take up the entire purge volume needed to get rid of the previous color, then you are right.
Most of the time there are sections where there is not enough infill to purge what it needs to though
Since it's not a good idea to extrude filament into open space, it has to build up a structure for that later Purge. That's why it seems to make a hollow pointless Purge Tower sometimes.
Another factor is the minimum Purge amount. I think that is set in the filament settings. By default it is not zero, meaning it will always create the tower no matter what, though it might be really skinny.
If you add objects that will be created from The Purge material you should see that Purge Tower get smaller when you reslice, or at least less dense