91
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 26 Sep 2024
91 points (98.9% liked)
Green Energy
2204 readers
83 users here now
Everything about energy production and storage.
Related communities:
founded 2 years ago
MODERATORS
Surely ability is determined by having the proper inverter though? The panels are irrelevant as without a proper grid matching inverter all connecting to the grid is going to do is destroy the inverter.
Also, as someone who is currently going through the process of registering a grid connected inverter here in the states, surely the whole point of the registration process is the part where an appropriately licensed electrician comes out to physically verify that the inverter is grid compliant and anti islanding, as that is the part that is likely to actually kill someone if it is improperly installed or configured.
It’s also something the government/utility has to take on trust to be declared, as a miss wired generator or battery backup transfer switch poses the near exact same risk.
I'm not very knowledgeable on Inverters, they don't come up much in the legal material I juggle around at work lol
Balcony Units have them built in as far as I know. The only big regulation when it comes to wiring is that anyone who has solar needs their Electricity Counter replaced with a bidirectional "Smart Meter", because classical Counters can't really count down when you feed into the Grid. I'm guessing that the Smart Meters themselves would have some sort of safety mechanism to prevent wildly miswired connections.
I think there was some sort of requirement to at least have an electrician check the solar setup before it gets connected too, but German law in most parts is "If you decide not to hire a licensed professional, then anything that happens is your own fault".
Unless you’re meters have a whole lot more protections built into them than ours I don’t think that they would have anti-islanding or grid frequency protections built in, that latter at least seems like it has to be done at the inverter level.
If it is the case than why bother with any registration or monitoring at all beyond requing a smart meter for anyone with a grid tied inverter?
As for the meter reading itself it’s going to depend on whether the inverter is connected to the gird, and if it is whether or not the inverter is set to grid export or only to provide as much power as the home is using at the time, possibly minus something for reactive power or some such.