Well, not really sunglasses, but rather clip-on shades for my 3D-printed glasses
But here's the thing: they're FULLY 3D-printed. The "lenses" are in fact the finest and thinnest mesh I could print with our printer - basically one 0.1mm layer of 0.4mm lines spaced 0.4mm running horizontally, and an identical layer of lines running vertically right on top of it.
Is it perfect? No. The image through it is kind of "pixelated" But it's surprisingly acceptable. It looks like this when looking through them:
In real-life, it's quite a bit darker than this. But the photo shows fairly accurately how it looks like seeing through them.
It works because the mesh is very close to the eyes and totally out of focus. And although it's not optical-grade, the price is unbeatable 🙂
If you want to try printing it yourself, the model is here. It's meant to be printed with a 0.4mm nozzle and a 0.1mm layer height - including the first one.
Double-check how the slicer slices the first two layers, where the mesh lives, because it easily tends to "simplify" the lines by not printing them, which is obviously not what you want.
EDIT: as others have pointed out in this thread, don't use these shades as actual sunglasses without sticking some UV filter over the mesh on the inside. They're not eye-safe as-is. I made them more for the challenge of making them than anything else.
since they are physically blocking light, shouldn't these block uv by the same amount it blocks all other light?
Sunglasses are often coated with special filters to block more UV light than other parts of the spectrum, e.g. 90+% of UV, but only 75% of visible. These glasses would block all light in (very roughly) even amounts. To achieve similar protection you would barely be able to see.
The wavelength of the light both influences what materials they penetrate and at what angle they get scattered. Can't speak for this particular material, but UV has a smaller wavelength than visible light, which gives it a smaller scattering angle. So it gets scattered more all over the place and makes it around little corners more easily. And you'll never be able to tell whether or not it was dangerous because you can't sense UV in any way.