Upgraded from a NEMA24 to a NEMA34.
Before going out and milling or buying it in metal it is always a good idea to testprint it.
Probably will use the plastic part for a while as 3mm wall-thickness PETG seems might already be good enough.
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
Compensating for something are we? /s
I see. Size doesn't matter to you. It is all about skills.
Let's me introduce you to the 400W NEMA24 servo.
edit: Sorry. Was only the 400W unit. Somewhere there should be a 750W speciment.
Also be careful with these motor. While a small NEMA17 found on 3D-printer has 0.5 Nm and under normal conditions will stall before serious harm happens this NEMA34 is 9Nm which is enough to break bones. Those 400W servos are equally dangerous. While only around 1Nm they have roughly 4Nm peak and keep this torque at high RPMs.
I'm sorry, I'm just insecure because I'm a small boi myself with a 8D shaft
Not bad either.
Previously I had a 1.85Nm on this axis which wasn't enough to reliably pull 1'500 mm^2/s acceleration milling metal. All sort of issues from overheating stepper driver to it losing steps.
Yeah I used these in my manual mill converted to do power drive and some basic CNC stuff. They are excellent and have a lot of torque, but they are also very slow. Especially with the amount of step down gearing in a manual mill, the end result isn't very fast. But I don't really care, I'm usually not in a rush to do anything.