submitted 1 year ago* (last edited 1 year ago) by pineapplelover@lemm.ee to c/3dprinting@lemmy.world

20 comments fedilink hide all child comments

Been having issues with this Inland PETG. I've had so many failed prints. This 230C print temp and 80C build temp print was the least f***ed up print I had so far.

I also adjusted combing to Within Infill and retraction to 7mm at 60mms. All other settings should be default on Elegoo Cura N4P Normal settings

Some of the bridging is fine and there are sections that even look good but the rest are covered in blobs and stringing. The inside as it was printing was making noises and small pieces flew out as it was being scraped and stuff. The top layer shows a bit of what I mean.

I'm kind of new to this and can't seem to narrow down on what the issues are I found online. I've adjusted temps and only made it worse. I raised extruder a bit so that helped. I would like to make it looks as perfect as can be like my PLA prints.

Let me know your thoughts below, I'm happy to try them out.

you are viewing a single comment's thread
view the rest of the comments

[-] deFrisselle@lemmy.sdf.org 2 points 1 year ago

Did you dry it

[-] pineapplelover@lemm.ee 2 points 1 year ago

I reopened a brand new petg filament roll and it had the exact same issues

[-] deFrisselle@lemmy.sdf.org 2 points 1 year ago

That doesn't mean it was dry from the factory I've had spools this year from Polymaker that were fine for the first third then had issues symptomatic of wet filament

this post was submitted on 20 Aug 2023

18 points (100.0% liked)

3DPrinting

15591 readers

9 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago

MODERATORS

andypiper@lemmy.world

j4k3@lemmy.world

henry_rowengartner@lemmy.world

GrayBackgroundMusic@lemm.ee