this post was submitted on 20 Jun 2025
738 points (98.7% liked)
196
3663 readers
2348 users here now
Community Rules
You must post before you leave
Be nice. Assume others have good intent (within reason).
Block or ignore posts, comments, and users that irritate you in some way rather than engaging. Report if they are actually breaking community rules.
Use content warnings and/or mark as NSFW when appropriate. Most posts with content warnings likely need to be marked NSFW.
Most 196 posts are memes, shitposts, cute images, or even just recent things that happened, etc. There is no real theme, but try to avoid posts that are very inflammatory, offensive, very low quality, or very "off topic".
Bigotry is not allowed, this includes (but is not limited to): Homophobia, Transphobia, Racism, Sexism, Abelism, Classism, or discrimination based on things like Ethnicity, Nationality, Language, or Religion.
Avoid shilling for corporations, posting advertisements, or promoting exploitation of workers.
Proselytization, support, or defense of authoritarianism is not welcome. This includes but is not limited to: imperialism, nationalism, genocide denial, ethnic or racial supremacy, fascism, Nazism, Marxism-Leninism, Maoism, etc.
Avoid AI generated content.
Avoid misinformation.
Avoid incomprehensible posts.
No threats or personal attacks.
No spam.
Moderator Guidelines
Moderator Guidelines
- Don’t be mean to users. Be gentle or neutral.
- Most moderator actions which have a modlog message should include your username.
- When in doubt about whether or not a user is problematic, send them a DM.
- Don’t waste time debating/arguing with problematic users.
- Assume the best, but don’t tolerate sealioning/just asking questions/concern trolling.
- Ask another mod to take over cases you struggle with, if you get tired, or when things get personal.
- Ask the other mods for advice when things get complicated.
- Share everything you do in the mod matrix, both so several mods aren't unknowingly handling the same issues, but also so you can receive feedback on what you intend to do.
- Don't rush mod actions. If a case doesn't need to be handled right away, consider taking a short break before getting to it. This is to say, cool down and make room for feedback.
- Don’t perform too much moderation in the comments, except if you want a verdict to be public or to ask people to dial a convo down/stop. Single comment warnings are okay.
- Send users concise DMs about verdicts about them, such as bans etc, except in cases where it is clear we don’t want them at all, such as obvious transphobes. No need to notify someone they haven’t been banned of course.
- Explain to a user why their behavior is problematic and how it is distressing others rather than engage with whatever they are saying. Ask them to avoid this in the future and send them packing if they do not comply.
- First warn users, then temp ban them, then finally perma ban them when they break the rules or act inappropriately. Skip steps if necessary.
- Use neutral statements like “this statement can be considered transphobic” rather than “you are being transphobic”.
- No large decisions or actions without community input (polls or meta posts f.ex.).
- Large internal decisions (such as ousting a mod) might require a vote, needing more than 50% of the votes to pass. Also consider asking the community for feedback.
- Remember you are a voluntary moderator. You don’t get paid. Take a break when you need one. Perhaps ask another moderator to step in if necessary.
founded 5 months ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
their shitty electrical grid means kettles take like double the time to boil.
That's not true and also it's not the reason. We just don't drink a lot of tea. There's not a huge reason to own an electric kettle unless you're drinking a lot of tea. It's still much faster than a stovetop kettle.
Great video on this from technology connections. tl;dr it takes more time, but not, like, that much more. We mostly just don't have a huge tea-drinking culture here.
My family (American) did drink a lot of tea. Surprise surprise, we had a kettle. I did not die of old age from the cumulative weight of all that waiting.
...you don't brew your coffee hot?
Not sure what you mean. Americans do brew hot coffee, but they generally don't use a kettle to brew it. Hand-brewing methods like pour over are a very recent trend here. In my experience growing up, the vast majority of households used an electric drip coffee machine, or a stovetop percolator before they had electricity. Even now, when pour over and the aeropress are starting to get popular, I'd wager that a vast majority of households are still using a machine - either a drip machine or one of those pod machines - rather than a brewing method that requires a kettle.
Edit: found some stats on American home coffee brewing. Among Americans who brew coffee at home, 48% tend to use a drip machine, and 29% use a pod machine, neither of which requires a kettle. If we assume the entire pour over (5%) and French press (5%) market owns a kettle, and that the entire "other" category (6%) owns a kettle (which seems very generous), that's still only 16% of home coffee drinkers using a kettle. (Another 7% use an espresso machine or percolator, and I think the last 1% was lost to rounding.)
Drip machines make worse coffee and are more of a hassle than just dumping hot water into the filter holder all at once so I'll chalk it up to abysmal US coffee culture combined with consumerism, then.
Not yet. Just you wait.
chronic exposure to time dramatically increases your chances of getting terminally old.
So why does Japan at 100V have electric kettles everywhere? It's a cultural reason not the electrical grid.
good point! i don't know much about their grid, only that it's 50Hz in the west and 60Hz in the east.
I've never heard of anywhere in US using 50Hz and I've lived on the West Coast my whole life.
I love that you've come into a discussion about Japan's electrical grid and still assumed that the conversation is about America.
I mean, the conversation started about America's electric grid. It was ambiguous from context.
No it really wasn't. "I don't know much about their grid" means the next "it" in the comment is referring to "their grid". No ambiguity to be had, friend.
that may be because we were talking about japan!
Not that East and West, the East and West.
Pretty much every person I know in Canada has an electric kettle and every single office I've worked in has one, my kitchen has 15a outlets which is still 1800W. I have a simple gooseneck kettle that I usw mainly for coffee, it's only 1kW and holds around 750ml, it's not blisteringly fast but it's boiled before I've ground my coffee.
The whole "120v is holding us back from having kettles" is way overblown (technology connections has a video on electric kettles).
1800W are not out of the ordinary for water cookers in Europe but that's definitely on the weak side. 3000 to 3200 is usually the maximum, probably because pulling the full 3600W would drastically increase the chances of tripping a fuse. My food processor is 600W and I might want to make a coffee while kneading dough.
Have to drop the US number by 20% for continuous loads like a kettle would be.
That said, US homes built in the last 40 years or so tend to have a lot of separate circuits in the kitchen. My house has one for the fridge, one for the disposal, one for the dishwasher, one for the lights that's shared with lights in adjacent areas, stove has its own 240V outlet, and then one for all the other plugs. If I ran the microwave and a kettle and a mixer all at once, I'd probably still trip it, but that's a lot of multitasking going on.
If kettles were continuous loads we'd have to reduce from 16A to 10A (2200W) or 8A (1800W). Schuko are rated for as little as 1h of 16A but for a kettle that's plenty, they're done in a minute or two.
German stoves are connected to at least 2x10A, newer installations (as in since the 70s or such) all provide 3x16A. Not actually three-phase they're still 220V appliances. Whether the outlets, light etc. are on different phases differs widely.
Our grid uses the same voltages as Europe. Our houses even generally receive 240V from the line. It's just that we went with 120V for most appliances and electronics for some reason.
I'd also argue a lot of Americans technically do have electric kettles, and they just don't realize it because they're advertised as coffee makers. It's not ideal, but you can definitely use a drip coffee machine to boil water, and it'll still be faster than a stove.
Unfortunately for every tea drinker in an American hotel, most coffee makers (at least the drip kind) will make any water boiled inside taste like coffee, unless they've been used exclusively for plain boiled water. Maybe a combo tea/coffee drinker wouldn't mind, but I've always found it intolerable.
But it's a good point about the grid - we have plenty of appliances for coffee that are principally glorified water boilers, and there's no evidence that our appliance voltage has hampered their popularity at all.
As a combo tea/coffee drink, it tastes horrible. Nobody wants tea flavored coffee or coffee flavored tea. Although you usually don't get tea flavored coffee in those hotel drip makers, but only because the grounds they use are shit tier quality and taste too burnt to even get tea flavors.
it really doesn't. european houses generally receive 400V from the line, split into 3 220V phases. you guys get two 120V phases that are fully phase-shifted, rather than 120° offset, and you bridge two phases to get 240 for heavy appliances.
It's mostly for commercial installations, but you can get 3-phase 480V here if you want it.
I don't think this has much to do with the grid, though. It's more that we started with 120V appliances, so that's what we built our homes to support.
You get 3-phase in the US if you live in a large apartment complex. Especially if it has an elevator. Since this combines to get 208V, the math works out to making your 240V stove only 75% of what it should be.
For residential use, split phase is fine. We just run the two legs to get 240V on the specific things that need it. That's generally electric stoves, water heaters, AC unit, electric dryer, and more recently, EV chargers. 3-phase is great when you're driving something that spins with a high draw, and of those, only the AC unit does that (electric dryers spend most of their electricity heating, not spinning).
Edison distributed +-110V DC against neutral, three wires, your AC system was designed to use those exact wires, then you expanded that compromise to the whole continent.
Europe in the beginning also had those small insular installations with odd systems but once it came to actually hooking up whole countries everyone opted for three-phase because it's the most sensible option. Whether or not the distribution network itself uses three conductors (just the phases) or four (plus neutral, or combined earth+neutral) differs quite wildly. Train electricity is still a clusterfuck.
I’ve actually timed my kettle. 15 ounces of water(I have larger mugs than ‘normal’) takes 2 minutes and 34 seconds to be a full rolling boil. I’m really not that concerned.
It's still just a few minutes. Don't heat up more water than you are going to use.
not true, that's a myth