2
submitted 11 months ago by lddm37@alien.top to c/homelab@selfhosted.forum

I'm Having a strange issue with a LoraWAN Gateway (SBC type device with allwinner H3) running armbian. The gateway would work for several days and then stop all network communication, it would disconnect from the router even though it is wired with an ethernet cable. I also tried to connect directly to the gateway via its fallback IP but the pings would timeout. Sometimes a reboot was all that needed to be done to make it work again.

The gateway is mounted in a 15U glass door network cabinet along with some switches, an Intel Nuc and mainly, an ISP router. The Router was broadcasting Wi-Fi from inside the cabinet and directly below the Nuc and Gateway.

So my question is, could the Wi-Fi signal affect the Gateway and cause this issue? It is to be noted that the Intel Nuc is not at all affected and is working perfectly fine.

you are viewing a single comment's thread
view the rest of the comments
[-] ProbablePenguin@alien.top 1 points 11 months ago

Extremely unlikely that wifi would affect it.

More likely a software crash or a hardware issue.

[-] lddm37@alien.top 1 points 11 months ago

I've finally decided to replace the device and turn off the Wi-Fi, hopefully this will not happen again.

this post was submitted on 23 Nov 2023
2 points (100.0% liked)

Homelab

371 readers
2 users here now

Rules

founded 1 year ago
MODERATORS