1097
This is a major Life Pro Tip
(kbin.run)
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 01 Mar 2024
1097 points (97.7% liked)
People Twitter
5228 readers
1242 users here now
People tweeting stuff. We allow tweets from anyone.
RULES:
- Mark NSFW content.
- No doxxing people.
- Must be a tweet or similar
- No bullying or international politcs
- Be excellent to each other.
founded 1 year ago
MODERATORS
You would need a circulation pump and a bypass valve on the sink in the bathroom or on the water heater. There still would be a very short period(time depends on pipe layout) of cold water unless you tear out the shower and put the bypass valve at the shower supply.
You wouldn't even need a plumber if you feel comfortable screwing lines together, but you might need an electrician if you can't add an outlet.
They cost under $400 to add, parts only.
I'm not talking about instant hot water. I'm talking about having the tap not be directly in the firing line of the shower head.
That way, when the tap is turned on, the initial burst of cold water goes all over the floor, instead of all over the person turning on the tap.
Ah, I misunderstood your point but it makes more sense now.
That would cost thousands and would require remodeling the shower. Not so bad if your tile is still in production or you can save the insert, but an older bathroom and you are going to be in it for thousands. Best case is you have access via the opposite walls and then you are in the low thousands unless you can do all the work yourself, but the end result will be kind of rough.
That sort of change is best saved for a remodel or fresh built.
Yes, the idea would be to stop building showers in such a silly way, and build them in a way that makes sense. As I said above, we worked it out with sink taps a while back, one day I hope it will be more standard for showers.