57
Why still using the imperial system? (abananaforscale.com)
submitted 7 months ago by Zerush@lemmy.ml to c/memes@lemmy.ml
92 comments fedilink hide all child comments
you are viewing a single comment's thread
view the rest of the comments
[-] captain_aggravated@sh.itjust.works 3 points 7 months ago

I'm building a shaker table out of white oak. I milled all my stock to 3/4" thickness.

Just today, I resawed a board to 3/8", or half its original thickness. I glued two boards together to make 3/2" (1 1/2") thick table legs, and I cut mortises 1/3 the thickness of the stock, or a nice even 1/4".

I'm familiar with the metric system, I learned chemistry and physics in metric. I prefer woodworking in fractional inches because metric seems like a bigger pain in the ass

[-] MeowZedong@lemmygrad.ml 3 points 7 months ago

The fact you are working in fractions is more important than whether it's SAE or metric. You can do the same with a cm instead of an inch.

this post was submitted on 31 Mar 2024
57 points (80.6% liked)

Memes

45719 readers
737 users here now

Rules:

  1. Be civil and nice.
  2. Try not to excessively repost, as a rule of thumb, wait at least 2 months to do it if you have to.

founded 5 years ago
MODERATORS
gary_host_laptop@lemmy.ml
sexy_peach@feddit.de
cyclohexane@lemmy.ml
cypherpunks@lemmy.ml