[Troubleshooting] Big stringing problem with flsun SR and Orcaslicer (lemmy.nz)

submitted 6 months ago by Rangelus@lemmy.nz to c/3dprinting@lemmy.world

11 comments fedilink hide all child comments

Ok guys, I'm breaking down and posting here to see if anyone has any ideas. I'm greatful for any advice.

I have an upgraded flsun SR. I recently lost my computer (psu issue, waiting for replacement) and I took this opportunity to switch from Cura to Orcaslicer.

Over-all I'm very happy, and getting some good speeds, but I just cannot remove stringing no matter what I try:

Retraction from 0-7mm. After about 3mm, no further effect
Retraction speed from 30mm/s-50mm/s. No noticable effect
Travel speed and acceleration both high (up to 350mm/s and 6000 accel. No effect
Temp from 205-215 with no effect
Dried filament and different colours, no effect
Wipe on retract on and off, up to 2mm wipe distance and 100% retraction. No effect
Messed with scarf seams on and off, no effect
No effect from layer heights

My setup:

Printer - FLSun SR running klipper with a speede pad
Filament - Esun PLA+
Upgrades - Deported fans, OMG v2 extruder, volcano hotend and high flow cht nozzle

you are viewing a single comment's thread
view the rest of the comments

[-] papalonian@lemmy.world 3 points 6 months ago

Dried filament and different colours, no effect

this post was submitted on 14 May 2024

37 points (97.4% liked)

3DPrinting

15577 readers

54 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago

MODERATORS

andypiper@lemmy.world

j4k3@lemmy.world

henry_rowengartner@lemmy.world

GrayBackgroundMusic@lemm.ee