4
Help can't install SSD (lemmy.world)
submitted 6 months ago* (last edited 6 months ago) by mx_smith@lemmy.world to c/framework@lemmy.ml
12 comments fedilink hide all child comments

I just got my Framework 16 DIY version and I can’t install the primary SSD because there is a captive screw in the place that holds the SSD down and I can’t remove it so the SSD doesn’t stay held down. There is a screw for the secondary SSD and it comes out. Any ideas?

Update: I got it out, anyone else with this issue, try and pull the screw out it’s very small on the threads so it just pulls out and pushes back in when the drive is seated.

you are viewing a single comment's thread
view the rest of the comments
[-] mx_smith@lemmy.world 1 points 6 months ago

I Can’t the secondary slot is smaller and made for a square size SSD.

[-] ichbinjasokreativ@lemmy.world 2 points 6 months ago

If you have a flathead screwdriver that fits into the screw head, you could try using that one while gently pressing down

[-] mx_smith@lemmy.world 1 points 6 months ago

I got it out by pulling it really hard, it looks like it may have been cross threaded, once I got it out and the SSD inserted it just snapped back in. It holds so I’m good. Thanks for all the suggestions.

[-] ichbinjasokreativ@lemmy.world 1 points 6 months ago

Glad to hear! out of curiosity, is there anything else bothering you about it?

[-] mx_smith@lemmy.world 2 points 6 months ago

As for the hardware no problems at all. I installed Ubuntu on one drive with no problem but Windows is a bitch to install.

this post was submitted on 15 May 2024
4 points (100.0% liked)

Framework Laptop Community

2649 readers
22 users here now

Related links:

Related communities:

founded 3 years ago
MODERATORS
uthredii@lemmy.ml
uthredii@programming.dev