31
10 Things to do after installing Lychee! (lemmy.world)
submitted 1 month ago by werefreeatlast@lemmy.world to c/3dprinting@lemmy.world
9 comments fedilink hide all child comments

1)You get thru downloading the thing since it advertises support for your printer, 2)Click on it to start using it right? 3)Right? 4)X out of the login window because you don't have a login and don't want one thanks. 5) Put the newly downloaded file in the trash bin. 6) Right click on the trash bin and "empty trash" 7-10) Relax for a bit since you don't have yet another data collecting app spying on you. But then post about how shitty the experience was.

I can't believe anyone would actually create a login to use an app like this. Fuck that. I will just use shitty chitubox for now. Fuck^2, but at least I don't live in some shit server with all my 3D models stolen or my credit card or GPS or whatever the fuck they want to get from me. I'm sure chitubox is already doing it, but hey I don't need a password for that.

top 9 comments
sorted by: hot top controversial new old
[-] IMALlama@lemmy.world 12 points 1 month ago

TIL there's a slicer called Lychee Slicer.

Sounds like a hot mess. Are you looking for a alternative? If yes, provide info but my off the cuff recommendation for a FDM printer is Orca Slicer.

[-] Fisch@discuss.tchncs.de 4 points 1 month ago

Any advantage to using Orca Slicer over PrusaSlicer? Basically the main reason I use PrusaSlicer is just cus it's on flathub

[-] IMALlama@lemmy.world 4 points 1 month ago

PrusaSlicer is a fork of Slic3r Bambu's slicer is a fork of PrusaSlicer Orca Slicer is a fork of Bambu's slicer and also pulls in ideas from super slicer (another PrusaSlicer fork).

In other words, they all share a common lineage. Each adds quality of life improvements over the fork, at least in theory. It's possible those quality of life improvements will make it back upstream to the thing that was forked.

As for specific examples, Orca Slicer has a somewhat different set of tuning parameters, some unique-to-it quality things like scarf seams, built in tuning prints (temp towers, EM multiplier, pressure advance, a test to find your max flow rate, etc) a revamped UI, etc. I haven't compared the two in a while, so it's possible that some of this has made its way upstream by now.

[-] werefreeatlast@lemmy.world 3 points 1 month ago

Oh fudge! It looked so good! Just can't do SLA. I have a Mars 3 spa printer.

[-] werefreeatlast@lemmy.world 2 points 1 month ago

I shall try it! Thanks!

[-] Hegz@lemmy.ca 8 points 1 month ago

I saw people chatting it up about how much better it eas. I finally installed and did the registration and signed in. Loaded my model, dealt with the wonky mouse controls, supppored, sliced, saved. Attempted to print, and it failed on the first layer. My first failure on that printer.

Went back to chutitubox and back to working prints.

[-] brisk@aussie.zone 7 points 1 month ago

I've migrated from Lychee to Prusaslicer+UVTools. It's less ergonomic, and the auto supports seem a little light-on, but it fulfills my needs and being open source means a lot to me.

[-] werefreeatlast@lemmy.world 2 points 1 month ago

This looks like a thing that would work for me! I will give it a go when I'm back from work.

[-] brisk@aussie.zone 2 points 1 month ago* (last edited 1 month ago)

Only just got your reply, but just in case:

Make sure to read through this if you are exploring this route https://github.com/sn4k3/UVtools/wiki/Setup-PrusaSlicer

this post was submitted on 25 Sep 2024
31 points (84.4% liked)

3DPrinting

15591 readers
10 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago
MODERATORS
andypiper@lemmy.world
j4k3@lemmy.world
henry_rowengartner@lemmy.world
GrayBackgroundMusic@lemm.ee