40

I'm looking for a cloud provider with a cheap VPS offer to host my own wireguard relay and use it to seed.

I've read that Switzerland is safe for torrenting, so I was thinking about using Infomaniak. Does anyone has experience with seeding torrents from their IP addresses ? I'm also interested in other suggestions.

Thank you :)

top 23 comments
sorted by: hot top controversial new old
[-] RiQuY@lemm.ee 11 points 2 weeks ago* (last edited 2 weeks ago)

BuyVM for sure, but maybe you should look for seedboxes, not VPSs.

[-] pcouy@lemmy.pierre-couy.fr 3 points 2 weeks ago

I want to use my own storage at home. I'm not gonna pay for several TB of storage on a seedbox when I already have the HDD

[-] abacabadabacaba@lemm.ee 6 points 2 weeks ago

ihostart has cheap VPS offers, and they explicitly allow torrents.

[-] pcouy@lemmy.pierre-couy.fr 3 points 2 weeks ago

Thank you. I'm definetly gonna check it out

[-] tuhriel@infosec.pub 6 points 2 weeks ago

Just a heads up about switzerland:

  • downloading movies and music is not illegal, but
  • uploading is
  • also download and upload of copyrighted software is illegal
[-] pcouy@lemmy.pierre-couy.fr 3 points 2 weeks ago

Thank you for the clarification.

I've also read that it's illegal in Switzerland to gather IP addresses because they are considered sensitive PII. Do you know about this, and does it protect me in any way if I use a swiss datacenter IP for seeding my torrents ?

[-] henfredemars@infosec.pub 5 points 2 weeks ago

Have you considered getting a VPN provider and running something like a container set up to run all the traffic through the VPN? Some even offer port forwarding.

It’s basically free for me since I’ve already been paying for the VPN for other use, and that device would be on anyway to serve Plex.

[-] pcouy@lemmy.pierre-couy.fr 2 points 2 weeks ago

I've considered it and ruled it out. That's why I'm specifically asking for a VPS to install my own VPN own.

I'm really not interested in paying 5+€/month when I can build my own for a fraction of that cost

[-] CaptSpify@lemmy.today 4 points 2 weeks ago
[-] pcouy@lemmy.pierre-couy.fr 2 points 2 weeks ago

Thanks, I'm going to check it out

[-] nesc@lemmy.cafe 2 points 2 weeks ago

I wouldn't recommend edis, they are great if you are looking for lesser known countries to hosr something. They are shit in everything else, namedly prices, low-bandwidth (1 tb is nothing if you are planning to torrent), bad support.

Switzerland isn't great when it comes to piracy, Romania, Moldova, Luxemburge, France, Canada are better. You can get cheap vps that won't care on buyvm or alexhost.

[-] nickiam2@aussie.zone 3 points 2 weeks ago

As others have pointed out, just get a VPN and run your torrents through that. I've used AirVPN and ProtonVPN. Both are P2P friendly and even offer inbound port forwarding. It would be easier to setup and likely cheaper too. Proton is incorporated in Switzerland and has servers all over the world.

[-] pcouy@lemmy.pierre-couy.fr 6 points 2 weeks ago

This does not answer the question I asked. I've already considered a commercial VPN and I've ruled it out (clearly not cheaper, unless you can find a decent VPN with port forwarding that costs less than 2€/month)

Oracle has a Forever Free tier that I use to host my VPN gateway. It's been running fine for years now.

[-] pcouy@lemmy.pierre-couy.fr 1 points 2 weeks ago

Are you using it to seed torrents ?

No, only for Wireguard. For torrents I use Mullvad from my home line.

[-] pcouy@lemmy.pierre-couy.fr 1 points 2 weeks ago

I've read somewhere Mullvad no longer offers port forwarding. Do you still manage to seed without it ?

[-] jsparrow@sh.itjust.works 1 points 2 weeks ago* (last edited 2 weeks ago)

Long story short, in a limited way.

If you look at the protocols available, there are two, BT and μTP.

BT needs one of two peers to have a port open to connect to, either they initiate the connection, or you initiate connection. So if you want to download Arch Linux 2024.12.01(magnet:?xt=urn:btih:265863cbbb5ed9ef39e7c891ebebdf1623b09d5e&dn=archlinux-2024.12.01-x86_64.iso), you'll need to either connect to a seeder that has a port open, or if you have a port open the seeder can connect to you.

μTP can solve this by performing NAT traversal using UDP hole punching. The way this works is a third peer with open ports will relay information for both peers with closed ports to connect to each other.

[-] halm@leminal.space 2 points 2 weeks ago

I had similar plans, but I opted for a seedbox instead. It gives me some peace of mind not torrenting on my own IP.

[-] pcouy@lemmy.pierre-couy.fr 4 points 2 weeks ago

I want to use my own storage at home. I'm not gonna pay for several TB of storage on a seedbox when I already have the HDD

[-] halm@leminal.space 2 points 2 weeks ago

That's fair. Similar situations, different conclusions 🙂

[-] Teddy@programming.dev -4 points 2 weeks ago
[-] pcouy@lemmy.pierre-couy.fr 4 points 2 weeks ago

As far as I know, tailscale still requires me to set up my own exit node

this post was submitted on 06 Dec 2024
40 points (93.5% liked)

Piracy: ꜱᴀɪʟ ᴛʜᴇ ʜɪɢʜ ꜱᴇᴀꜱ

55056 readers
302 users here now

⚓ Dedicated to the discussion of digital piracy, including ethical problems and legal advancements.

Rules • Full Version

1. Posts must be related to the discussion of digital piracy

2. Don't request invites, trade, sell, or self-promote

3. Don't request or link to specific pirated titles, including DMs

4. Don't submit low-quality posts, be entitled, or harass others



Loot, Pillage, & Plunder

📜 c/Piracy Wiki (Community Edition):


💰 Please help cover server costs.

Ko-Fi Liberapay
Ko-fi Liberapay

founded 2 years ago
MODERATORS