10u revxlp prototype build (lemmy.world)

submitted 1 year ago by petejohanson@lemmy.world to c/ergomechkeyboards@lemmy.world

17 comments fedilink hide all child comments

Been iterating a bit on my revxlp design, and a frequent request is for a 10u/"5 col" version.

Finally did a build of the first protos, and it's working great! I want to do a few tweaks for the newly added ability to use the single color LEDs for either per -key or bottom backlighting, once that's done I'll formally release the changes.

This particular build was half soldered by our elder daughter, and she fully assembled post-soldering including keycap selection. I love the look she chose, which she said "reminded her of a sunset over the water"

10u revxlp
XIAO RP2040 running ZMK
Keycaps:
- MBK: dyes from MKU and factory dyes from LowProKB
- Asymplex convex 1u artisans for the bottom row
Choc whites
MJF nylon case print from JLC

top 17 comments

sorted by: hot top controversial new old

[-] UtMan1988@lemmy.world 2 points 1 year ago

It looks like it belongs on the TOS Enterprise set

[-] hansamann@lemmy.world 2 points 1 year ago

Just checking - files/parts/build guide is not yet available, or did I miss it somewhere?

[-] petejohanson@lemmy.world 3 points 1 year ago

10 work has been merged. I've got a bit more docs work to do on the new optional bottom facing single color LEDs, I would skip those for now.

[-] hansamann@lemmy.world 1 points 1 year ago

Would you say 10u PCBs ready to order? Would order with jlcpcb assembly...

[-] petejohanson@lemmy.world 2 points 1 year ago

Yes. The PCB and pick and place files all look good. Does seem that JLC now doesn't have the threaded solder nuts in 2mm height for some reason, so you'd need to source those along w/ the hotswap socket, and any other parts they get grumpy about.

[-] hansamann@lemmy.world 1 points 1 year ago

Just fyi - bottom plate Gerber's for FR4 shows a 404 for me...

[-] petejohanson@lemmy.world 3 points 1 year ago

Sorry about that. Fixed!

Let me double check the PCBA files... I didn't get the 10u protos assembled, but they should be fine.

[-] hansamann@lemmy.world 2 points 1 year ago

Awesome, you deserve thx so much. I will try again soon as some of the components are not available, indeed. Would be nice to get it assembled fully.

[-] petejohanson@lemmy.world 2 points 1 year ago

Do remember that even with assembly on the bottom, you still need to solder the controller sockets, pogos, and battery connector.

[-] joao@aussie.zone 2 points 1 year ago

Looks great, and probably a better job soldering than I'd be able to do.

[-] hansamann@lemmy.world 2 points 1 year ago

This is it - thx so much, let me know when you think it's ready and I am ready to build.

[-] hansamann@lemmy.world 1 points 1 year ago

I still would love to build it but jlcpcb shows these mounting holes as not available... any better idea than just trying again every week?

[-] Lenbok@lemmy.nz 1 points 1 year ago

Looks very similar to the humla (barring the different MCU). Cool board!

[-] petejohanson@lemmy.world 2 points 1 year ago

Indeed! It was somewhat inevitable it was going to, but I still wanted to do it for the XIAO-ness of it.

[-] felixwhynot@lemmy.world 1 points 1 year ago

What kind of keymap do you use on here? I’m interested in learning a layout with less keys so I can have a travel board and lazy fingers 🙃

[-] petejohanson@lemmy.world 2 points 1 year ago

I'll post my personal keymap a bit later. It's mostly Callum style mod approach.

[-] petejohanson@lemmy.world 2 points 1 year ago

Here's a render of the keymap, you can see the file over at https://github.com/petejohanson/revxlp-config/blob/main/config/boards/shields/revxlp/revxlp.keymap

this post was submitted on 01 Aug 2023

93 points (98.9% liked)

ErgoMechKeyboards

5686 readers

2 users here now

Ergonomic, split and other weird keyboards

Rules

Keep it ergo

Posts must be of/about keyboards that have a clear delineation between the left and right halves of the keyboard, column stagger, or both. This includes one-handed (one half doesn't exist, what clearer delineation is that!?)

i.e. no regular non-split¹ row-stagger and no non-split¹ ortholinear²

¹ split meaning a separation of the halves, whether fixed in place or entirely separate, both are fine.
² ortholinear meaning keys layed out in a grid

No Spam

No excessive posting/"shilling" for commercial purposes. Vendors are permitted to promote their products/services but keep it to a minimum and use the [vendor] flair. Posts that appear to be marketing without being transparent about it will be removed.

No Buy/Sell/Trade

This subreddit is not a marketplace, please post on r/mechmarket or other relevant marketplace.

Some useful links

EMK wiki
Split keyboard compare tool
Compare keycap profiles Looking for another set of keycaps - check this site to compare the different keycap profiles https://www.keycaps.info/
Keymap database A database with all kinds of keymap layouts - some of them fits ergo keyboards - get inspired https://keymapdb.com/

founded 1 year ago

MODERATORS