82
$1200 chair, $60 HOTAS, $15 filament = Spaceflight Commander (lemmy.world)
submitted 10 months ago* (last edited 10 months ago) by overzeetop@lemmy.world to c/3dprinting@lemmy.world
12 comments fedilink hide all child comments

<- gallery of parts

https://imgur.com/a/dkILl03

I've been wanting to try and make a mount for space gaming to go with my office chair - a Steelcase Leap. The organic-ish arms didn't make an easy way to create a clamp system, but in fooling around with it recently I noticed I could remove the armrest pads and they had a nice 4-bolt pattern. Since this is my office chair I need to be able to swap in or out of gaming setup easily.

I added a 30mm tall adapter that lets me slide a 6mm x 30mm (actually, 1/4x1-1/4) bar in and secure at the back, with a plate adapter to mount my old HOTAS4 to the bar, and a pin at at the rear for quick release.

The plates and adapters are eSun PLA+ which is fairly stiff but has some durability/ductility to it. The bar was supposed to be 6061-T6 aluminum but I was lazy and didn't feel like making a mess in the shop, ripping down some surplus plate I have, and I was too cheap to go out and buy 1/4x1-1/4 steel bar stock so I decided to print the bars from PAHT-CF (high temp nylon with carbon fiber). The 385mm bars just barely fit diagonally on my CR-10s.

top 12 comments
sorted by: hot top controversial new old
[-] d00ery@lemmy.world 11 points 10 months ago

Gallery link only shows one picture for me in Sync for Lemmy

[-] overzeetop@lemmy.world 4 points 10 months ago

Thanks for the heads up… try https://imgur.com/a/dkILl03

[-] PerogiBoi@lemmy.ca 6 points 10 months ago

That’s a comfy chair. I had one at work and then during the pandemic someone stole it. Are ya playing Elite Dangerous?

[-] overzeetop@lemmy.world 2 points 10 months ago

I’ve had it for 15 years and just replaced the seat cushion last month.

I have 5 cmdrs in elite, I think. Only one is on Odyssey. One Horizons-end-game-all-but-carrier with 6B credits and a fleet, one stuck 15,000LY in the black, two with T-9s I made for commodity storage, and one new play through that’s mid-game (the odyssey one). I’ve mostly given up since I don’t have the free time / desire to grind for alien fights and the new on-foot and eco-bio stuff just doesn’t wow me.

[-] PerogiBoi@lemmy.ca 1 points 10 months ago

Ya once I bought the anaconda I realized there wasn’t much left to do really. Game kind of went stale for me. Playing the game in VR is an absolute quantum leap though.

[-] wjrii@kbin.social 4 points 10 months ago

my office chair - a Steelcase Leap

Good chair. I'm still using a refurb V1 that was surplus from an office supply place 6 years ago I think it was maybe $200 or $300. I replaced the original armrests 3 years ago for under 40 bucks, and I'm on my second replacement $20 cylinder. Everything else has been perfect. I harvested a HM Mirra 1 for free when our office's lease was up (tried to grab an Aeron, but they said only the Mirras were for the taking), and my wife has a Steelcase Gesture, but I think I like the leap better than any of them.

[-] naevaTheRat@lemmy.dbzer0.com 1 points 10 months ago

Dude 1200 is too much to spend on a chair. I wouldn't brag about it.

Like idk maybe it's comfy or something but that's bespoke carpentry throne money.

[-] AliasVortex@lemmy.world 1 points 10 months ago

One of the best pieces of advice I've picked up from the Internet is to never cheap out on things that connect you to the ground (tires, shoes, mattresses, chairs, etc). Theses chairs are primarily sold to business/ offices where they're meant to be used and abused daily for years without needing to be replaced while still remaining ergonomically comfortable. That said, 1200 is the new sticker price, you can absolutely find them second hand/ refurbished/ resold for a quarter of the price. Admittedly still expensive, but very much worth it when compared to an IKEA/ office max special.

(I may be a little biased since I daily drive a Leap V2)

[-] naevaTheRat@lemmy.dbzer0.com 1 points 10 months ago

Ok look advertising has clearly done a number on your brain because that is a fucking absurd amount of money to spend on a chair.

Like nothing in it is worth that much, you can get a very comfortable chair for 200 usd. You're not getting 1000 usd extra value from this, just think about how much money that is and what materials this is actually made of.

Things marketed to business are absurdly overpriced because spending someone else's money is easy, but you don't need a chair adaptable to any body shape and capable of taking 500 kg of load. you know what body shape you are, and you probably aren't that heavy. Features that sort of make sense in an office environment if you're high on your own farts are completely unnecessary at home.

This is about status, hence why OP literally leads with a brag about how much money they can afford to light on fire in this post.

Hell medical evidence suggests you don't even want too comfy of a chair because you should move around and engage your core muscles. Stuff like lumbar support is actively harmful to most people.

So get a nice chair sure but it's a chair, you shouldn't spend 12 weeks groceries on abs, mild steel, polyester, and maybe some polycarbonate. That's stupid.

[-] overzeetop@lemmy.world 1 points 10 months ago

You don’t want to know how much the monitor cost, then.

[-] naevaTheRat@lemmy.dbzer0.com 1 points 10 months ago

god i'm poor

[-] tagginator@utter.online -2 points 10 months ago

New Lemmy Post: $1200 chair, $60 HOTAS, $15 filament = Spaceflight Commander (https://lemmy.world/post/10397876)
Tagging: #3dprinting

(Replying in the OP of this thread (NOT THIS BOT!) will appear as a comment in the lemmy discussion.)

I am a FOSS bot. Check my README: https://github.com/db0/lemmy-tagginator/blob/main/README.md

this post was submitted on 06 Jan 2024
82 points (95.6% liked)

3DPrinting

15541 readers
223 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago
MODERATORS
andypiper@lemmy.world
j4k3@lemmy.world
henry_rowengartner@lemmy.world
GrayBackgroundMusic@lemm.ee