[-] Kethal@lemmy.world 58 points 1 month ago* (last edited 1 month ago)

CloudFlare makes more than a billion dollars a year in revenue. The work done for this project is probably worth millions to them and they paid out $100,000. That sounds like bullshit to me. Let corporations hire lawyers instead of doing their work for a pittance.

[-] Kethal@lemmy.world 93 points 1 month ago

These network transactions cost between 2 to 4 % for merchants, which is a cost passed to consumers by businesses raising prices. That's a fairly large "inflation", and certainly it seems out of line with the effort they out into it. It's anticompetitive practices that keep it in place.

[-] Kethal@lemmy.world 200 points 2 months ago* (last edited 2 months ago)

It seemed odd to me that a Web site could write to or read from the clipboard without the user approving it. That would be a pretty obvious security and privacy issue. From what I gather, on Chrome sites can write to the clipboard without approval, but they need approval to read. ~~On Firefox and others any access requires permission. Thus this exploit seems limited to Chrome users.~~

@SkaveRat pointed out that it doesn't require permission, only interaction. So likely there's a button that's clicked that writes to the clipboard, and most browsers are susceptible to this.

[-] Kethal@lemmy.world 79 points 2 months ago* (last edited 2 months ago)

There's always some post in here saying for people to use Linux. I find an admonishment to be pretty hollow, so I'll share my recent experience installing a Linux distribution rather than simply saying it's something people should do.

I installed one of the many Debian variants. Getting the installation media is certainly going to be a challenge for casual users. Otherwise, it was easy. It walked through the steps. It was different from installing windows, but I felt it was no more difficult. I am well versed in this stuff, but I feel like nothing in the installation process would be a problem for a casual computer user.

It offered several desktops programs at the login screen. This could likely throw off a lot of people. However, if you just logged in and ignored that you might never even know there were different options. The default was KDE. Everything worked. Nothing needed to be tweaked. This is in starck contrast to Windows, where once you get past installation, you need to get rid of a ton of crap it throws at you. The Windows 10 start menu is an unbelievable collection of weird boxes and shit and the task bar is similarly full of junk. The KDE start menu is just a menu. The task bar has your tasks. There's nothing to do.

I did try Cinnamon too. I prefer the simplicity. I don't think casual users are going to care.

Overall, I think for casual users, it's actually easier to set up and use than Windows. Getting installation media prepared is not something most people are going to readily do, but I think it's the same with Windows. They have the advantage there of having manufacturors install it. Otherwise, whatever issues there have been installing Linux distributions in the past aren't there now. Conversely, installing and especially the configuration after installation is much harder on Windows than it used to be. If you're slightly tech savvy, give Linux a try.

[-] Kethal@lemmy.world 80 points 3 months ago

It sounds neat. Offline maps. If Google hadn't banned it I would have never heard of it. It's on F-droid too for those who don't want to download and install an apk.

[-] Kethal@lemmy.world 96 points 5 months ago* (last edited 5 months ago)

It's unfair to blame the restaurant when the private equity firm that bought them deliberately stripped the restaurant's assets, hoping to rip off some later buyer. https://www.nbcnews.com/business/consumer/private-equity-rolled-red-lobster-rcna153397

[-] Kethal@lemmy.world 111 points 7 months ago

Nick Cage and John Travolta in Face Off

[-] Kethal@lemmy.world 83 points 8 months ago

Yeah, and the risk of death with euthanasia is even higher!

[-] Kethal@lemmy.world 143 points 8 months ago* (last edited 8 months ago)

Just before he was elected, his campaign conspired to prevent the release of US hostages, a move they made to make Carter look bad. This is one of the reasons he won. The man worked directly against the benefit of US citizens for personal gain.

It's a shame that Carter gets the blame for failing to reach an agreement to release the hostages, instead of Regan getting pinned for the much worse behavior of deliberately delaying their release.

[-] Kethal@lemmy.world 70 points 10 months ago

You like this episode of Futurama. Would you also like to watch this episode of Futurama?

[-] Kethal@lemmy.world 79 points 1 year ago* (last edited 1 year ago)

I hear a lot that gas is cheaper for heating and I took that as the truth for a long time. A while ago I did the math though, and for my house is would have been nearly the same annual power bill if I replaced my 90% gas furnace and water heater with electric units. Although the price of gas is far more economical for heating, there's a monthly gas usage fee that's a flat rate. If you go all electric, you don't pay that, and over the course of a year, I didn't heat enough for the lower gas price to offset the flat fees. If instead of a regular electric furnace and water heater, they were heat pumps, electric would have been much cheaper than gas.

This certainly would depend on your local prices and weather and how well your house is insulated, but if you need a new furnace, I'd do the math over a year to see if gas is still the most financially attractive option, especially if you can install an air or ground source heat pump.

18
submitted 1 year ago by Kethal@lemmy.world to c/buildapc@lemmy.world

I've never built a PC before and I don't know that I know all of the considerations.

I'd like something as a server for automated backup from other devices, like phones. I may also do video reencoding on it. I'd like it to be fairly small, but it doesn't need to be that small. This is what I've picked out: https://pcpartpicker.com/list/L3pxGP.

The case, motherboard and power supply I plan to use is the AsRock Deskmini, but it wasn't an option on Part Picker: https://www.newegg.com/asrock-deskmini-x300w/p/N82E16856158068. This was attractive because it says it has a built-in RAID setup. This is for backups, so I'd like RAID, but I don't know anything RAID, so a built-in option sounded convenient. The Deskmeet would have been fine too, but it's out of stock.

Is the cooler OK for that processor? I don't care about a video card, and the 5700G has integrated graphics, but I don't know if I need something else to get the graphics working. Is there anything else I should consider?

Thanks for any help.

[-] Kethal@lemmy.world 113 points 1 year ago

If you don't need an all-in-one printer, then the Brother HL-L2350DW is great. The best thing about it is that it prints. These accolades are really the bare minimum you'd expect from a device called a "printer", but that's where we are in the world of consumer electronics.

1
submitted 1 year ago* (last edited 1 year ago) by Kethal@lemmy.world to c/ahk@programming.dev

Using Window Spy, Acrobat Pro doesn't appear to have button IDs to use with ControlClick. I can't find shortcut keys for almost any of the actions, and trying to navigate through the buttons with F6 and tab seems like a no-go too. The only ways I see to do this are to hardcode button positions or use or ImageSearch, both of which I find don't work well because coordinates change with window resizing or different resolution displays.

Does anyone have a different approach or know of a way to handle different displays and window sizes? In particular, I want to activate "Visually digitally sign".

1
submitted 1 year ago by Kethal@lemmy.world to c/plumbing@lemmy.world

The connections under my sink have a flexible tube that I'd like to replace with rigid tube. The stub out from the wall doesn't have the nut and threaded connection I've seen before, and they've used what I think is called a no-hub connector.

Would I use the no-hub connector on the rigid tube or do I sweat something like this on? https://www.brasscraft.com/product/1-12-in-o-d-tube-x-1-12-in-fip-3/ Or is there some other way?

I've soldered the narrower water supply lines, but nothing this large. Is there anything to consider other than heating it longer?

The stub out has corroded on the bottom and there's a thin crack that the no-hub fitting covers, so there isn't a leak now, but I don't know if that will be covered if I sweat on a connector. Is there a way to deal with that crack?

As some extra info, I think that some stubs are threaded into the vertical pipe. This isn't threaded in and doesn't look like it can be removed without opening the wall and replacing it.

1
Is this a termite? (lemmy.world)
submitted 1 year ago* (last edited 1 year ago) by Kethal@lemmy.world to c/whatsthisbug@lemmy.ml

This is from Illinois. I think maybe it's a spider wasp, but I don't have any idea what I'm talking about, so I worry that it's a termite.

1
submitted 1 year ago by Kethal@lemmy.world to c/firefox@lemmy.world

Is there a way to block all pinterest results from search engines? This doesn't seem to work: https://addons.mozilla.org/en-US/firefox/addon/unpinterested/.

This one doesn't block results in image search: https://addons.mozilla.org/en-US/firefox/addon/hohser/

Simply using "-site:pinterest.com" isn't great, because there are a bunch of pinterest domains: pinterest.com.mx, pinterest.es, etc. Typing them all in every time is a hassle.

view more: next ›

Kethal

joined 1 year ago