Here's the requisite Manley analysis of the GEM 63XL SRB anomaly on today's Vulcan certification flight.

I'm upset that a meme I tried to remake with Unicode box drawing characters lines up terribly in apps: https://lemmy.ca/post/28490027 Shouldn't code blocks render in monospace?

On Lemmy's web frontend it's perfect:

On Connect it looks like this:

On Jerboa it's basically the same:

Eternity does use monospace but the box drawing characters seem to be too wide.

All I can find about it here is one post from a year ago: https://lemmy.ca/post/1492857

cross-posted from: https://feddit.uk/post/12276336

Sorry for the crap photos - I just wanted to share these extra keys I added to my Lily58.

I noticed there was a gap in the matrix so I tacked a spare hot-swap socket to the pads on the back of the PCB. That worked with minimal modification to my QMK set-up. I couldn't really use it dangling off some wires so I set out to make an extension that would slot in and be retained by one of the standoffs. I don't have a laser cutter or 3D printer so I just hacked these out of a sheet of ABS plastic following a printed template and glued them up. They're nice and solid and line up really well, despite being rather rough around some of the edges.

I'm finding the 1.5U keys a bit confusing at the moment, swapping them out for 1U keys makes it a bit easier to home my thumbs. These are certainly much easier to access than the outermost keys on the lower row or the keys below the display. I'm thinking they need to be called Lily Pads.

cross-posted from: https://feddit.uk/post/12276336

Sorry for the crap photos - I just wanted to share these extra keys I added to my Lily58.

I noticed there was a gap in the matrix so I tacked a spare hot-swap socket to the pads on the back of the PCB. That worked with minimal modification to my QMK set-up. I couldn't really use it dangling off some wires so I set out to make an extension that would slot in and be retained by one of the standoffs. I don't have a laser cutter or 3D printer so I just hacked these out of a sheet of ABS plastic following a printed template and glued them up. They're nice and solid and line up really well, despite being rather rough around some of the edges.

I'm finding the 1.5U keys a bit confusing at the moment, swapping them out for 1U keys makes it a bit easier to home my thumbs. These are certainly much easier to access than the outermost keys on the lower row or the keys below the display. I'm thinking they need to be called Lily Pads.

Sorry for the crap photos - I just wanted to share these extra keys I added to my Lily58.

I noticed there was a gap in the matrix so I tacked a spare hot-swap socket to the pads on the back of the PCB. That worked with minimal modification to my QMK set-up. I couldn't really use it dangling off some wires so I set out to make an extension that would slot in and be retained by one of the standoffs. I don't have a laser cutter or 3D printer so I just hacked these out of a sheet of ABS plastic following a printed template and glued them up. They're nice and solid and line up really well, despite being rather rough around some of the edges.

I'm finding the 1.5U keys a bit confusing at the moment, swapping them out for 1U keys makes it a bit easier to home my thumbs. These are certainly much easier to access than the outermost keys on the lower row or the keys below the display. I'm thinking they need to be called Lily Pads.

Hi All,
I'm still very new to Nix but trying to daily-drive NixOS.

What I'm currently stuck on is injecting Python packages into a Jupyterlab service. What I have at the moment in the home-manager.home portion of my system flake is the following:

  systemd.user.services.jupyter = let
    jupyter = pkgs.jupyter-all.override {
      python3 = pkgs.python311.withPackages (python-pkgs: with python-pkgs; [
        numpy
        matplotlib
      ]);
    };
  in {
    Service = {
      Type = "simple";
      WorkingDirectory = "${home.homeDirectory}/notebooks";
      ExecStart = "${jupyter}/bin/jupyter-lab --no-browser";
    };
  };

This fires up a JupyterLab process that I can connect to and which runs fine, but numpy etc. can't be imported. From a devshell, I see that the python.withPackages mechanism seems to rely on $PYTHONPATH to pass in a python3-3.11.8-env package that contains a lib/python3.11/site-packages. I'm guessing that the systemd service just needs to have an Environment key, but where do I get the python3-3.11.8-env path from?

The Jupiter executable is in a /nix/store/#-python3-3.11.8-env/bin location, but the site-packages only include the modules for Jupyter so I assume there's another python3-3.11.8-env in the nix-store that does have the python packages I'm trying to get. Trying things like jupyter.env gives errors like *** Python 'env' attributes are intended for interactive nix-shell sessions, not for building! *** but I'm just taking a stab in the dark here.

I'd appreciate any pointers on this. I see there are helpers like JupyEnv, but these seem focused on setting up ephemeral devshells, not running a service for long-term notes and seem like overkill for what I want.

RFA uploaded a short overview video of their ARGO vehicle:
Youtube link
Piped alternative

Explore Argo, our flexible & reliable cargo capsule with an end-to-end service for only €150M/launch for 4,000kg up-and-down mass & 15.5m³ pressurized cargo volume.

Developed with Space Cargo Unlimited Atmos Space Cargo, Argo is our commitment to rebuilding independent European space cargo capabilities.

Find out more about Argo here: https://www.rfa.space/argo/

I seem to have gotten a saved account that can't be switched to and therefore can't be removed.

My instance had some server side issues and on PC I had to delete my cookies to get the desktop site to work. Connect wouldn't work and I had to add the account again. At some point the account name has changed to my email address @feddit.uk, which looks weird since it has two @ symbols. The newly added account works fine, but there's this stuck second version of it.

When I try to switch to the broken version I get an error pop up that just says "Error: unable to switch to 'me@email.domain@feddit.uk'" and it seems to retain the currently selected account.

Since I can't switch to that account, I can't sign out to have Connect forget it. So I don't see a way to get rid of it.

Has anyone else run into the same problem? Any suggestions?