I've added an inverter sizing calculator to my website WattBuild. The goal is to establish what devices will be used, and to calculate continuous and surge power requirements using typical loads from our device research.

Open to any feedback!

I'm in the process of converting my garage to my home office and want to set up solar to run my laptop, a couple monitors, lights, phone charging and I'm sure a few other small things.

I'm looking at this power station EcoFlow DELTA Portable Power Station 1300 and getting 4 of these panels Topsolar Flexible Solar Panel 100W 24V/12V to run parallel.

It seems like this setup would work, but I'm just curious what people who know more think about this setup and if there's a better way.

I do like the portable power station so if the power goes out I can bring it in the main house as well as being able to plug it into an outlet for those cloudy days and I like the flexible lightweight panels as I'll be installing these myself.

I want to make a solar charger for tool batteries. I'm thinking plug a standard AC dual 5 amp 20v battery charger into an inverter charged via a solar battery bank. Enough to charge four batteries during the day. That's not in the budget so I'm going to start small with just one battery at a time (600watts?). Maybe two batteries a day if I can afford it.

Who here has built such a battery bank? What advice do you have? What handy online calculators do you recommend? Is there a spreadsheet available that is better than a calculator? In the past I would have looked for those myself but search engines are totally useless now. Would you rather have one big battery hooked up to the inverter or a bank of smaller batteries in series or parallel?

If this type of post isn't allowed, I can take it down. I am not affiliated with LiTime but I like their batteries since seeing Will Prowse's teardowns of them. They have some smaller battery options for DIY projects.

cross-posted from: https://natur.23.nu/post/12050

I wanted to park my bikes - or depending on the Season - my Renault Twizy somewhat protected and easy accessible.

After adjusting the yard fence to form a pocket I put a frame aluminium profiles on top. On top of that is a second frame which is angled at 10 degrees and on that are the solar panels.

10 degrees seem to be a viable compromise between self cleaning, sun capture, construction height and openings to the elements on the side.

It was much more challenging than i thought to find solar modules with a form factor fitting the shed.

4 Standard modules where far to big. So I choose two modern 410 Wp modules and 3 130 Wp “camping” modules.

I got two 600 W dyne (“Bosswerk”) Micro-inverters cheap, because everybody want’s 800 W now and they have a regulatory issue with a missing relay.

The 130 kWp panels are cabled serially but still seem to have issues getting enough voltage to start the inverter in the morning.

I’m happy with the project. Things in the shed are getting much less wet during rain und not baking hot during sunshine.

I might close the gaps between the panels obe day but that is low priority- the thing was never meant to be totally watertight.

I also like it being some kind of Solarpunk landmark in our street.

I'm looking for a small setup that allows the panel to be removed without removing screws from the roof and exposing holes.

My office/ lab at home uses around 600W when fully running, and I see that there are quite a few power stations that will comfortably handle that, and foldable 4 panel setups that can generate 300-400W.

Would there be any issues plugging a UPS (my lab has a few of them) into a solar power station such as this?

Is there some sort of feature I want to look for such as sin wave, etc to have this work reliably, or does a UPS not really care since the controller in the power station should be normalizing voltage, etc?

Hey guys I am planning to do my own solar and am looking into some kits and prices. I was quoted $22k for a 7.4kw system but I'm thinking of doing a 12.7kw one myself without the bloat of a loan and contractor install.

The problem I'm currently having is trying to pair up a premium panel with Enphase microinverter. I see that REC is highly regarded as one of the best, but the REC 420 is only compatible with the IQ8X which together will run me over 14k for just the panels and inverters, let alone the rest of the infrastructure. But the REC 400 is compatible with the IQ8A.

Suntansolar has some pretty nice kits, one of which has the ZNshine 410's that run a little longer but I should have the space, as well as the Iq8a micros. But I'm not familiar with that brand.

Does anyone have experience with a good combo set of panels and inverters? I think generally the consensus has been that microinverters are the way to go.

Can I connect a 5w 5w solar panel directly into a 10k mAh portable battery bank safely via USB 2.0, or does it need some sort of protection in-between like a solar charge controller or a schottky diode?

Example of battery bank (except one with usb 2.0 input): https://www.anker.com/ca/products/a1229

Example of solar panel: https://www.aliexpress.com/item/1005006012344670.html

Hey all,

I've got a set of three 60-cell panels and microinverters that I want to mount on an asphalt shingle roof. I'm planning to expand the array to 16 panels in time.

Does anyone have recommendations for low-cost mounting systems and online retailers that sell them? I like the idea of rails, but from what I've seen shipping costs are prohibitive and I'm trying to do this on a budget, so rail-less options are appealing also.

For several years I've used a Raspberry Pi Zero for sensors, camera & door motor control which opens & closes a chicken coop door. The Rpi & controller is 5v, the motor is 12v. This has been powered by around 50' of extension cord, but the elements are beginning to weather the cord & we also need to move the chickens further away from our mains. I think it is time to implement solar. I aspire to assemble a PV, battery, & converter system which:

• Uses an off-the-shelf 12v PV panel (30w or so)
• Uses LiFePO cells for heat resiliency & stability
• Provides both 12v & 5v power
• Isn't proprietary; uses standard, easily-sourced components... unless it meets specs perfectly & isn't terribly expensive.
• Minimal power draw; at most 2 amps @ 12v for 10 seconds twice daily.

Does anyone have suggestions regarding this configuration, know of a post, blog, or video which does something similar, or is willing to ID components you'd recommend for this project?

The Renogy Wanderer states that it is optimized for 10A, 12V/24V batteries. What would happen if it was connected to a battery pack containing one 3.6V 18650 battery such as this?

At Palmetto, as the go-to experts in renewable energy, we empathize with the unique needs of RV enthusiasts, particularly in regions like South Carolina, where landscapes transition from coastal retreats to lush woodlands. This blog post serves as your comprehensive guide to diverse solar panel options for RVs. We understand that informed decisions are crucial for your mobile adventures, and our goal is to equip you with the knowledge needed to choose the optimal solar solution. From high-efficiency monocrystalline panels to adaptable flexible options, Palmetto ensures that every RV owner finds a solar solution that perfectly aligns with their specific requirements and enhances their on-the-road experience.

Palmetto's Commitment to RV Solar Solutions in South Carolina As the premier RV solar seller in South Carolina, Palmetto takes pride in offering a diverse range of solar panel options tailored to the unique demands of RV owners. South Carolina's diverse geography, ranging from coastal areas to inland forests, calls for versatile solar solutions that cater to the changing energy needs of mobile enthusiasts. Furthermore, Palmetto provides RV solar solutions designed to withstand diverse weather conditions, ensuring optimal performance in various terrains.

Palmetto’s Overview On Different RV Solar Panel Options Palmetto's commitment to revolutionizing RV solar solutions is evident in our comprehensive overview of various options. Tailored to meet the distinct needs of RV enthusiasts, our solar panel range is designed to thrive in South Carolina's diverse landscapes. From high-efficiency monocrystalline panels to adaptable flexible solutions, each option in Palmetto's arsenal promises to elevate your RV experience. Join us as we delve into the intricacies of different RV solar panel options, empowering you to make an informed choice for an eco-friendly and enhanced journey.

Source URL https://palmettoenergysolutions.us/our-blogs/f/exploring-different-solar-panel-options-for-rvs

Hi everyone, had anyone played with alternative battery technology to try and bring the cost of storage down when weight and space are not an issue? Zinc bromine? Nicole iron?

As my first foray into Solar DIY, I'd like to try to power a 5V computer fan with a solar panel. My goal is to run it for at least several hours per day. My understanding is that I'd need the solar panel (duh!), a fan, a charge controller, and a battery. As a newbie, I'd like to run my setup by this community since you know better than I do. Please let me know if this makes sense:

Steps:

1. Strip end of solar panel wire and attach to charge controller
2. Connect micro USB cable to battery bank and strip the other end to connect to charge controller
3. Strip end of computer fan and attach to charge controller

Parts:

1. 10W, 5V Solar Panel:
   https://web.archive.org/web/20231107180209/http://web.archive.org/screenshot/https://www.aliexpress.com/item/1005004587476483.html?spm=a2g0o.productlist.main.3.72bbaAk6aAk6KS&algo_pvid=4fe1d766-427c-4c24-978d-094fb385b2b9&algo_exp_id=4fe1d766-427c-4c24-978d-094fb385b2b9-1&pdp_npi=4%40dis!CAD!39.69!17.07!!!28.30!!%402101fb1116993792757332890e8301!12000029732119781!sea!CA!177099580!&curPageLogUid=tN1l84mY50ZP

2. Spare cable that terminates in micro USB

3. 10A Solar Charge Controller:
   https://web.archive.org/web/20231107180717/http://web.archive.org/screenshot/https://www.aliexpress.com/item/1005005210165491.html

4. 5000mAh, 5V 2A Input, 5V 2.1A output Battery Bank (one I have laying around similar to this):
   https://web.archive.org/web/20231107175655/http://web.archive.org/screenshot/https://www.aliexpress.com/item/4001322867876.html

5. DC 5V, 0.75W, 0.15A fan (also a part I have laying around)

Sorry if this is a wrong community to ask these question since my system is only partially DIY, but does anyone have experience with EPS systems like EcoFlow Delta?

I'm trying to figure out exactly how it works when all 3 sources of power are available: battery, AC and solar. Is it able to use them in combination if solar doesn't provide 100% of demand?

And if anyone is using UPS units, how are you dealing with lack of ground? I'm thinking of daisy chaining UPS to EPS to avoid sensitive equipment from shutting down during failover, but I'm concerned that UPS will not like operating without ground.

I’m starting to design a quite large solar pergola, to be built in the southern uk. Has anyone got any advice on the different methods of adding waterproofing between panels? And/or any general tips or experiences in constructing the pergola?

Has anyone here ever had success running either of these in a solar-powered off-grid structure?

I've seen and read several sources/product reviews that advise against using each of these (especially incinerating toilets) with a solar setup, but I've heard anecdotes from a couple of people who used a dedicated solar panel for a mini-split and had no problem.

I think an incinerating toilet is the best option for my location, but I'm not sure if I can swing it off-grid.

(Cross posted in !off_grid)

I have three extra solar panels from a pack of 10 I ordered. I don't have room for them to fit with my other 7 panels and am looking for unique ideas on where to put them. I could throw them up on my east facing roof, or perhaps on a large playhouse in the back yard. I could lean them up against a south wall, or mount them to a railing. Any other crazy ideas?

I'm looking to build out a semi-off grid system for a cabin. I have a 2000w generator I'd like to use to feed the inverter/charger to assist with the battery charging. The datasheet indicates that it'll draw significantly more current than the generator can provide. Can the charge current be adjusted down in software? I see recommendations for buying a standalone AC charger, but that seems silly. I'm looking at the GroWatt SPF-3000 unit.