Help me decide!

I was looking through the docs and forum posts and it didn't mention anything useful, just that you can.

Title. Asides from setting the whole disk to read-only. (It's not an option since apparently docker dislikes that for some reason.). I'm trying to increase my microsd's lifespan.

For instance, here's my current /etc/fstab

tmpfs /tmp tmpfs rw,size=10M,nr_inodes=5k,noexec,nodev,nosuid,uid=gus,gid=notgus,noatime,mode=1700

tmpfs /var/log tmpfs rw,size=10M,nr_inodes=5k,noexec,nodev,nosuid,uid=gus,gid=notgus,noatime,mode=1700

tmpfs /var/tmp tmpfs rw,size=0M,nr_inodes=5k,noexec,nodev,nosuid,uid=gus,gid=notgus,noatime,mode=1700

tmpfs /var/run tmpfs rw,size=0M,nr_inodes=5k,noexec,nodev,nosuid,uid=gus,gid=notgus,noatime,mode=1700

tmpfs /var/spool tmpfs rw,size=0M,nr_inodes=5k,noexec,nodev,nosuid,uid=gus,gid=notgus,noatime,mode=1700

tmpfs /var/lock tmpfs rw,size=0M,nr_inodes=5k,noexec,nodev,nosuid,uid=gus,gid=notgus,noatime,mode=1700

tmpfs /var/cache tmpfs rw,size=0M,nr_inodes=5k,noexec,nodev,nosuid,uid=gus,gid=notgus,noatime,mode=1700

Thanks in advance.

I got my hands on the weird monitor so I decided it make this little thing. It runs retropie. I also got some cool controllers for it but they use serial and I haven't been able to connect them yet.

Cross posted from: https://lemmy.world/post/9314337

Cross posted from: https://lemmy.ml/post/9052486

I installed CasaOS into my RP3 only to run Adguard home and syncthing. After installing them I couldn't get them to work.

For Adguard I figured out how to get to the dashboard and settings but I read that I should use it as "host" not bridge when I change to host I can't get back to the dashboard.

For syncthing I just never got it to open.

Is there another way to have these two apps on the RB3 ?

I installed LibreELEC on a Raspberry Pi 4 yesterday and it's working really well, except for AV1 playback. The thing is, it's almost fast enough but the video stutters every few seconds and is a little slower than it should be. Is there a way to make it faster, by switching the decoder or enabling multi-core decode or something like that?

I found this decoder which might be what I'm searching for but I don't know how to make it work in LibreELEC.

Is there any difference from one another? I keep hearing that using chargers is absolutely a no-go and that power supplies are much safer and better overall. Do you guys confirm this?

Thanks in advance.

Currently have Pi4 4GB running emulation station quite well. Thinking of preordering 5 (4 or 8gb depending on advise from here) and getting into the Pi NAS game, should I swap them round or will I be happier with the 5 as the NAS?

If you are like me and are currently waiting for your 5V 5A power supply and you have no display, you can still boot to USB by pushing the power button when the Raspberry Pi goes "solid green". What you are not seeing without a display is the warning about your power.

This allowed me to boot up to Raspberry OS Lite (64 bit) with no issues.

The referenced link does a good job showing you how to boot.

Hello guys! I have a single M3U file with couple of Internet Radio stations which I'd like to have playing on an RPi with a couple of speakers connected to a 3.5mm. I have a Home Assistant instance running in my local network and it would be perfect if I could control it via automations.

Does anyone have an idea what the best setup would be?

I'm just wondering if anyone has any insight into a good case design with heat sinks and a fan that also accommodates a HAT, such as the new M2 HAT. I'd love to run a Pi 5 with M2 SSD inside a case with a fan plugged into the PWM port. Can anyone point me in the right direction?

Ideally it would look something like this, but be large enough for the HAT and somehow incorporate good fan placement for airflow.

This looks like an interesting solution to my question. It mounts underneath the pi, which means things like heat sinks and a PWM-powered fan would work fine. As long as there's a case that fits this type of setup, it looks like it would work great!

HI Guys..

I have a Raspberry Pi 4B & I've been looking into using it with an AI image upscaler, to batch upscale images. I have yet to find any useful info, or to get anything I've tried working. Just wondering if anyone here would be able to offer up any thoughts or info.

Many thanks....

Things I've tried: esrgan, real-esrgan, ncnn, upscaly & beatmup.

Can you recommend any screen video capture programs compatible with Wayland, possibly with Debian binaries? I'd like to use such a tool on my Raspberry Pi 400 under Raspberry OS Bookworm 64-bit.

Wasn't the Raspberry Pi 5 supposed to start showing up in volume by end of October early November? Looking at rpilocator they are more like unicorns.

As title implies. It's about to be 5 years old. Doesn't have a case. Runs 24/7 as a dns+adblock server, while (also) playing a live stream 24/7. systemd-journald is masked, and both cron/chrony removed. No stutter happens when the low voltage warning pops up tho.

Thanks in advance!

I'm fortunate to live in Cambridge so my wife popped in to the store and picked one up for me. I forgot to ask her to get a case so that's an excuse to go back over the weekend 🤣

I installed osmc in onto my raspberry pi 4 in order to easily have a portable movie player station.

I know you can buy a remote that works with osmc but I was hoping to get my Xbox controller synced up with it via Bluetooth. At first I was having tons of issues getting it to even connect (my phone did easy enough.) I figured out that it didn't autoreconnect to the Wi-Fi network I had connected it to last time I used it, when I reconnected it the controller was able to sync with it no problem. Anywho I'm at the point where it's connected via Bluetooth, but the buttons do nothing.

Is there something I'm missing?

Edit: I installed Libreelec and it seems to work great.