213
submitted 8 months ago* (last edited 8 months ago) by Kalcifer@sh.itjust.works to c/selfhosted@lemmy.world

I use nftables to set my firewall rules. I typically manually configure the rules myself. Recently, I just happened to dump the ruleset, and, much to my surprise, my config was gone, and it was replaced with an enourmous amount of extremely cryptic firewall rules. After a quick examination of the rules, I found that it was Docker that had modified them. And after some brief research, I found a number of open issues, just like this one, of people complaining about this behaviour. I think it's an enourmous security risk to have Docker silently do this by default.

I have heard that Podman doesn't suffer from this issue, as it is daemonless. If that is true, I will certainly be switching from Docker to Podman.

you are viewing a single comment's thread
view the rest of the comments
[-] adam@doomscroll.n8e.dev 16 points 8 months ago

But... You literally have ports rules in there. Rules that expose ports.

You don't get to grumble that docker is doing something when you're telling it to do it

Dockers manipulation of nftables is pretty well defined in their documentation. If you dig deep everything is tagged and natted through to the docker internal networks.

As to the usage of the docker socket that is widely advised against unless you really know what you're doing.

[-] moonpiedumplings@programming.dev 6 points 8 months ago* (last edited 8 months ago)

Dockers manipulation of nftables is pretty well defined in their documentation

Documentation people don't read. People expect, that, like most other services, docker binds to ports/addresses behind the firewall. Literally no other container runtime/engine does this, including, notably, podman.

As to the usage of the docker socket that is widely advised against unless you really know what you’re doing.

Too bad people don't read that advice. They just deploy the webtop docker compose, without understanding what any of it is. I like (hate?) linuxserver's webtop, because it's an example of the two of the worst footguns in docker in one

To include the rest of my comment that I linked to:

Do any of those poor saps on zoomeye expect that I can pwn them by literally opening a webpage?

No. They expect their firewall to protect them by not allowing remote traffic to those ports. You can argue semantics all you want, but not informing people of this gives them another footgun to shoot themselves with. Hence, docker “bypasses” the firewall.

On the other hand, podman respects your firewall rules. Yes, you have to edit the rules yourself. But that’s better than a footgun. The literal point of a firewall is to ensure that any services you accidentally have running aren’t exposed to the internet, and docker throws that out the window.

You originally stated:

I think from the dev’s point of view (not that it is right or wrong), this is intended behavior simply because if docker didn’t do this, they would get 1,000 issues opened per day of people saying containers don’t work when they forgot to add a firewall rules for a new container.

And I'm trying to say that even if that was true, it would still be better than a footgun where people expose stuff that's not supposed to be exposed.

But that isn't the case for podman. A quick look through the github issues for podman, and I don't see it inundated with newbies asking "how to expose services?" because they assume the firewall port needs to be opened, probably. Instead, there are bug reports in the opposite direction, like this one, where services are being exposed despite the firewall being up.

(I don't have anything against you, I just really hate the way docker does things.)

[-] adam@doomscroll.n8e.dev 6 points 8 months ago* (last edited 8 months ago)

Documentation people don’t read

Too bad people don’t read that advice

Sure, I get it, this stuff should be accessible for all. Easy to use with sane defaults and all that. But at the end of the day anyone wanting to using this stuff is exposing potential/actual vulnerabilites to the internet (via the OS, the software stack, the configuration, ... ad nauseum), and the management and ultimate responsibility for that falls on their shoulders.

If they're not doing the absolute minimum of R'ingTFM for something as complex as Docker then what else has been missed?

People expect, that, like most other services, docker binds to ports/addresses behind the firewall

Unless you tell it otherwise that's exactly what it does. If you don't bind ports good luck accessing your NAT'd 172.17.0.x:3001 service from the internet. Podman has the exact same functionality.

this post was submitted on 11 Mar 2024
213 points (90.5% liked)

Selfhosted

40382 readers
376 users here now

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.

Rules:

  1. Be civil: we're here to support and learn from one another. Insults won't be tolerated. Flame wars are frowned upon.

  2. No spam posting.

  3. Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it's not obvious why your post topic revolves around selfhosting, please include details to make it clear.

  4. Don't duplicate the full text of your blog or github here. Just post the link for folks to click.

  5. Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).

  6. No trolling.

Resources:

Any issues on the community? Report it using the report flag.

Questions? DM the mods!

founded 2 years ago
MODERATORS