33
Shower curb standing water
(lemmy.sdf.org)
This corner of the shower seems to be having some mold issues from regular use. Water seems to be collecting in that spot after a shower and doesn't seem to be draining properly. Is there anything I can do for a permanent fix?
I've tried keeping my bath fan on for an hour after the shower and don't want to have to squeegy it after each use.
It would be something like adding a corner of slanted tile there and grouting it into place. There is no way it will ever look like it was supposed to be there. And if you don't get it sealed 100%, now you have a void which is basically permanently wet inside.
Another option would be to build up some silicone in the area, that is probably going to look even less good, but it will be easier, more likely to seal well, and can be removed. Do note if the tile is bumpy, getting the silicone out of the bumps later might prove difficult, but if the tile is smooth, you can scrape it off pretty easily. After you put it down, you can smooth the silicone out with a wetted finger or smoothing tool.
I would personally be tempted to go the silicone route if a full fix is off the table since mold is evil.
Ah yeah I've used silicone to recaulk the glass when the mold got under it. I might take your suggestion here... I'll end up using a lot just to get the slope. As far as shaping it, I suppose I can use a straightedge to form the slope. Luckily the surface is flat so removing the silicone won't be a problem