365

Faux Wood Grain using MMU! (lemmy.world)

submitted 3 months ago by 4lan@lemmy.world to c/3dprinting@lemmy.world

56 comments fedilink hide all child comments

I made a magsafe mount in black for my Kia and I didn't like the layer lines on the curved parts, but it gave me the idea to try using wood

I have a 3D Chameleon MMU so I added color changes randomly throughout between two shades of brown. One is wood, one is PLA.

It honestly came out way better than I even expected!

If anyone wants the STL I can provide it!

top 50 comments

sorted by: hot top controversial new old

[-] DavidGarcia@feddit.nl 56 points 3 months ago

10/10 would grain

[-] 4lan@lemmy.world 13 points 3 months ago

When the comment is better than the post 😅

[-] DavidGarcia@feddit.nl 11 points 3 months ago* (last edited 3 months ago)

cool new extremely innovative home-made project vs low effort shit post

[-] 4lan@lemmy.world 28 points 3 months ago

Sanded and assembled!

[-] cashmaggot@piefed.social 7 points 3 months ago

Magnifique!

[-] filcuk@lemmy.zip 4 points 3 months ago

That'd a cool idea and it looks really good. I'll have to try this for myself!

[-] NaoPb@eviltoast.org 3 points 3 months ago

Wow!

[-] Tenthrow@lemmy.world 13 points 3 months ago

How much purge for something like this?

[-] 4lan@lemmy.world 13 points 3 months ago* (last edited 3 months ago)

I'll check the slicer again but it was really small. Most of the purge went into infill instead. Maybe like 5 grams?

I had my purge values low to encourage blending of the colors. I might try using 0 for purge volumes next time to encourage more natural blending.

[-] Sphks@lemmy.dbzer0.com 5 points 3 months ago* (last edited 3 months ago)

What slicer is it ? I will check if it is possible to set no purge at all in BambuStudio - since I have an AMS lite.

It looks feasible with a purge multiplier set to 0. https://forum.bambulab.com/t/setting-an-unbeatable-record-no-flush-at-all/51052/4

[-] 4lan@lemmy.world 7 points 3 months ago

Orca :)

It's pretty similar to bambu

[-] 4lan@lemmy.world 10 points 3 months ago* (last edited 3 months ago)

purge tower was pretty hollow

[-] blindbunny@lemmy.ml 8 points 3 months ago

That's beautiful and extremely creative. I should fix my printer.

[-] 4lan@lemmy.world 5 points 3 months ago

Do it!! And thank you!

[-] jjagaimo@lemmy.ca 7 points 3 months ago

Do you think printing without purge would make it look better? Or would it just blend into an medium brown

[-] 4lan@lemmy.world 4 points 3 months ago

I think better, if there was always a little bit of leftover filament the pattern will be more random I think. With more gradual gradients

[-] cashmaggot@piefed.social 6 points 3 months ago

Ah, I was trying to understand what MMU was. Then I realized off of those ridges that this was a 3D printed model. I was looking at the "marbling" and imaging it was some sort of putty or something akin to sculpey. It looks both groovy and comfy and you did a great job =)

load more comments (16 replies)

[-] ExcessShiv@lemmy.dbzer0.com 5 points 3 months ago

I'd love a 3D chameleon for my printer, but their shipping rate (I live in EU) is absolutely insane and unreasonable since they don't even handle import and taxes for that price.

load more comments (1 replies)

[-] MrQuallzin@lemmy.world 4 points 3 months ago

With Sunlu's new filament joiner coming out, I might give this a try by splicing segments of different browns together into a big roll. It's a very near concept, and your print looks amazing!

[-] 4lan@lemmy.world 4 points 3 months ago

That's a great idea! Would be such a faster print too

[-] chiliedogg@lemmy.world 2 points 3 months ago

Gist time I sliced something for my AMS lite I was flabbergasted by the increase in printing time and waste.

For those unaware, since you're often having 4 filament changes per layer, each of which take about a minute, a 1hr mono-fillament print can suddenly turn into a 36-hr print with 5-10x more filament being purged than ends up in the model.

It's really cool, but super wasteful.

But you can strategize to minimize filament changes by splitting up a model and stacking it to minimize filament changes per layer. This one only took about 8 hours.

[-] 4lan@lemmy.world 2 points 3 months ago* (last edited 3 months ago)

One reason I love the 3D chameleon is that it is easily modified in how it operates.
I have mine doing color changes at 20 seconds! It shaves many hours off of some big 4 color prints

I always Purge to infill and if there is a lot of purge material in the block I will add an object that is printed using the Purge. Something that I don't mind being stripey

[-] chiliedogg@lemmy.world 3 points 3 months ago

What annoys me and I don't entirely understand is the purge tower. If I purge to infill or another object, why am I still having to build this dumb tower? If you choose to disable the tower, it disables the purge to infill option.

[-] 4lan@lemmy.world 2 points 3 months ago

If the infill is enough to take up the entire purge volume needed to get rid of the previous color, then you are right.

Most of the time there are sections where there is not enough infill to purge what it needs to though

Since it's not a good idea to extrude filament into open space, it has to build up a structure for that later Purge. That's why it seems to make a hollow pointless Purge Tower sometimes.

Another factor is the minimum Purge amount. I think that is set in the filament settings. By default it is not zero, meaning it will always create the tower no matter what, though it might be really skinny.

If you add objects that will be created from The Purge material you should see that Purge Tower get smaller when you reslice, or at least less dense

[-] GrayBackgroundMusic@lemm.ee 4 points 3 months ago

ooh that's clever

[-] ramenshaman@lemmy.world 3 points 3 months ago

That's brilliant. What nozzle diameter and layer height did you use?

[-] 4lan@lemmy.world 3 points 3 months ago

Thank you! Standard 0.4mm nozzle, 0.2mm layers

[-] ramenshaman@lemmy.world 2 points 3 months ago

One of those two filaments is wood fill right? Do you ever get clogs with the 0.4 nozzle?

[-] 4lan@lemmy.world 3 points 3 months ago

Absolutely, I was going to use a lighter shade of wood it kept clogging on me. Do I switched to the light brown pla. I think moisture is a big component in that too

[-] ramenshaman@lemmy.world 3 points 3 months ago

You might try a 0.6mm nozzle, I know some manufacturers recommend >0.4 for filaments with filling in them.Very cool project though, you're giving me some ideas.

[-] 4lan@lemmy.world 3 points 3 months ago

Yeah I might try that next time. I have .8 and 1.0 too, but too lazy to keep swapping 😂

[-] ramenshaman@lemmy.world 3 points 3 months ago

I feel it. Those quick-swap nozzles are pretty appealing. Every time I swap a nozzle on the bambu I literally swap the entire hotend and unplug 3 delicate connectors. I'm worried they'll break after a couple dozen swaps.

[-] 4lan@lemmy.world 3 points 3 months ago

I couldnt do it! I bought a pack of volcano nozzles for dirt cheap in all sizes, volcano is forever!

[-] mavu@discuss.tchncs.de 3 points 3 months ago

this is cool!

[-] clay_pidgin@sh.itjust.works 2 points 3 months ago

That looks great!

[-] daqu@feddit.org 2 points 3 months ago

Be careful with PLA in your car, it will probably deform in the sun.

[-] 4lan@lemmy.world 2 points 3 months ago

For sure! Luckily I park in an underground garage, so my car interior never really gets over 90

I have some PC just in case it does warp

[-] NaoPb@eviltoast.org 2 points 3 months ago

Pretty cool!

load more comments

this post was submitted on 15 Aug 2024

365 points (98.7% liked)

3DPrinting

15590 readers

137 users here now

3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.

The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io

There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml

Rules

No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts

If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is ![](URL)

Moderation policy: Light, mostly invisible

founded 1 year ago

MODERATORS

andypiper@lemmy.world

j4k3@lemmy.world

henry_rowengartner@lemmy.world

GrayBackgroundMusic@lemm.ee