391
submitted 11 months ago by bartolomeo@suppo.fi to c/asklemmy@lemmy.ml

And tell me how proud of it you are.

top 50 comments
sorted by: hot top controversial new old
[-] Philo@sh.itjust.works 188 points 11 months ago

Me. 62 years. As long as it keeps on ticking, I'm proud.

[-] ininewcrow@lemmy.ca 48 points 11 months ago

Seriously? No upgrades, augments, removals or additions?

I'm 45 and I don't think my knees or hips will last that long. And my memory will probably degrade over the next twenty years.

load more comments (1 replies)
[-] cynar@lemmy.world 116 points 11 months ago

I've got a Miele washing machine that's the best part of 40 years old. It's required some maintenance over the years. However, it was designed with maintenance in mind, so all the repairs have been fairly painless.

My 5 year old dishwasher, on the other hand, has cost me more time, money and stress than the (very overworked) washing machine.

[-] 9point6@lemmy.world 51 points 11 months ago

Miele shit just continues to exist inexplicably. Literally unbreakable (permanently). And according to what I've read, at least, their modern stuff has not dropped in quality

I honestly can't think of any brands that have anything close to that longevity

[-] cynar@lemmy.world 59 points 11 months ago

It's the little things that count.

  • The drain pump is just 3 bolts to take off (pump came back to life after I tipped it. The new one is still sat in the cupboard a decade later).

  • The electronics are mounted on their own door. They swing out, and are VERY easy to service.

  • The wiring diagram was in a plastic wallet inside the machine.

  • The shocks are easy to access and come off with an M10 spanner and are easy access.

Those are just the ones that have noticed explicitly, the whole machine was built with that mentality.

load more comments (1 replies)
load more comments (5 replies)
[-] mateomaui@reddthat.com 88 points 11 months ago

My original NES and game cartridges. Still work great, although retired as collectibles in favor of emulators now.

[-] SnotFlickerman@lemmy.blahaj.zone 41 points 11 months ago

I got lucky with mine. I started having issues with mine around 2000. I lived in Washington, only like an hour from Nintendo of America. At the time, Nintendo still serviced all their old consoles up to and including their current consoles. (This would change in 2006, with the Wii, when they started releasing old games digitally, it was game-over for their long-term servicing of old consoles.) So I took mine in, and if I recall correctly, it was about $50 to get all my games professionally cleaned and for the console to be cleaned, fixed, and sent home with new power supply and controllers.

It's been a champ ever since.

[-] mateomaui@reddthat.com 16 points 11 months ago

I wish I had known about that. The cleaning accessories I’ve found over the years have kept it going without issues, but I definitely would have sent mine in for a preventative professional cleaning and refurbishing if they found anything wrong with it.

load more comments (2 replies)
load more comments (3 replies)
[-] Saigonauticon@voltage.vn 70 points 11 months ago

A pocketwatch manufactured in 1889. I keep it running as a memento mori: the watch may outlive the watchmaker. Build things well -- they may be all people remember you by, one day.

I also have a slide rule at my desk at most times, to remind me of false-precision.

I guess the oldest though, is a Wu Zhu coin from the Three Kingdoms period (currency is a technology, too?). I keep it to remember that all empires arise from chaos, and must return to it; that all assets eventually have no value. That the things that endure, are stranger currencies still.

load more comments (5 replies)
[-] Snowpix@lemmy.ca 63 points 11 months ago* (last edited 10 months ago)

A 1940s era Sterling Siren Model "F" factory siren. This siren spent decades outside of a Long Island, NY firehouse, acting as a street clearing siren to allow fire engines to exit the station unimpeded during an emergency. It was decommissioned a few years ago and popped up on eBay, and I was able to get ahold of it for cheap as the seller didn't know its worth. Model F sirens are very hard to find, as they haven't been made since the 1960s, and the need for street clearing and fire sirens have lessened with the advent of pagers. I believe there are less than a dozen left in service across North America.

Mine is in very good running shape, despite its age. I lubricated the bearings recently (brass sleeve bearings) and let the motor break in. It isn't quite as loud as my Federal Sign & Signal Model "L" (built in the 1960s) but still packs a punch. I usually set them off with the city sirens every Monday. It does need cosmetic restoration, as the paint is badly weathered and the projector has some dents in it, but it won't be hard to fix up.

https://youtu.be/KvsGiL15g1k?si=ZgheNIH-fqOHJXnJ

My Model L is on the left, and my Model F is on the right.

[-] mindbleach@sh.itjust.works 24 points 11 months ago

Your neighbors must love you.

load more comments (1 replies)
load more comments (9 replies)
[-] roscoe@startrek.website 59 points 11 months ago

My paternal grandmother's KitchenAid model K mixer she bought just after my grandfather returned from WW2. She gave it to my mother in the late 70's because she wanted a new one and the damn thing showed no signs of dying. My mother gave it to my wife about 15 years ago for the same reason.

We've bought some new accessories but that fucking zombie mixer will outlast the roaches.

[-] ironeagl@sh.itjust.works 21 points 11 months ago

Might be worth regreasing it, iFixIt has some good guides on that.

load more comments (2 replies)
[-] pixelscript@lemmy.ml 46 points 11 months ago

I still listen to my music using a 160 GB iPod Classic. Apple struck gold with that clickwheel. Carrying around a dedicated device for music just for that elegant one-thumb control I don't even have to look at to use is still totally worth it to me.

load more comments (11 replies)
[-] TIMMAY@lemmy.world 41 points 11 months ago

I am the oldest piece of working hardware I own and I am constantly disappointed by it

load more comments (1 replies)
[-] Shanedino@lemmy.world 40 points 11 months ago

You probably mean electronic not technology. But I have a mechanical singer sewing machine from the 1800s that's still in working order.

load more comments (1 replies)
[-] DahGangalang@infosec.pub 37 points 11 months ago* (last edited 11 months ago)

Not at all impressive, but to maximize interactions on a newborn thread:

It's probably my PS3, which I would have gotten Christmas 2008 (or maybe it was 2009?). I recently started sailining the seas, and the most convenient way to watch those videos is to burn them to a disk, and so the PS3 is really just a glorified DVD player (can't even be bothered to use it's blue ray functionality)

load more comments (4 replies)
[-] kent_eh@lemmy.ca 35 points 11 months ago

I have my grandparents gramophone.

We pull it out each year to listen to their old Christmas records.

It's become a tradition that my university age kids still look forward to.

[-] rmuk@feddit.uk 34 points 11 months ago

I have a General Post Office model 711 telephone. I installed a microcontroller into it and it's now the keypad for my home alarm system. It's also hooked into Home Assistant so I could have it for other things if I wanted.

load more comments (2 replies)
[-] pastermil@sh.itjust.works 31 points 11 months ago

I got a fountain pen with my initials on it from my grandfather. We have the same initials.

[-] DaCrazyJamez@sh.itjust.works 30 points 11 months ago

Depending on what you consider technology:

I have several firearms well over 100 years old in perfectly operational condition.

Quite a few kitchen appliances from the 70s that will never die.

And a working Apple IIgs.

As far as use on a daily or near daily basis, I have a 1974 Fender guitar amp, and a few other speakers and musical instruments that are vintage that are also going to outlive me.

load more comments (1 replies)
[-] owenfromcanada@lemmy.world 29 points 11 months ago

Polaroid Land camera, ~1950. Found it after my grandparents passed. Never tried using it, it's just neat.

load more comments (10 replies)
[-] TokenBoomer@lemmy.world 28 points 11 months ago

I have a wheel on my bike.

load more comments (3 replies)
[-] toastal@lemmy.ml 27 points 11 months ago

I have a beard trimmer from like 2008. I have literally no feelings about it.

load more comments (1 replies)
[-] joe_archer@lemmy.world 25 points 11 months ago

A very rare 1965 push button UK telephone, which I converted to work on DTMF.

Almost all UK phones from this era are dial based so it was very hard to find. It is our actual land line phone, not that our landline is ever used. Looks cool though.

[-] eugenia@lemmy.ml 25 points 11 months ago* (last edited 11 months ago)

1959 mechanical cameras. An electronic camera from 1969. Polaroid SX-70 from 1976. A calculator from 1988: FX85P from Casio. And then the Atari Lynx from 1991.

[-] hamburglar26@wilbo.tech 24 points 11 months ago

1966 Fender Princeton guitar amplifier. Me likey

[-] neidu2@feddit.nl 24 points 11 months ago
load more comments (2 replies)
[-] MrJameGumb@lemmy.world 23 points 11 months ago

A 12" Samsung TV that I've had since I was a kid. If I had to guess I'd say it's from 1989 or so. It still works perfectly except that it now has to warm up for a minute or so. I currently have a Roku box connected to it that I use for watching old shows in SD format lol

[-] cynar@lemmy.world 17 points 11 months ago

If you've not done so, look into replacing/getting replaced the electrolytic capacitors in the TV. They are one of the only parts that truly suffers from aging. By the sound of it, some of yours are on their last legs. If you replace them before they go completely, you can limit the damage. A failed cap can often cause damage to other components.

The caps will generally have their value and tolerances printed on them. They are ¢ each, so it's fairly cheap, parts wise.

[-] Neon@feddit.uk 16 points 11 months ago
load more comments (1 replies)
[-] FlyingSquid@lemmy.world 22 points 11 months ago
load more comments (5 replies)
[-] vext01@lemmy.sdf.org 20 points 11 months ago

I still use my Dad's old hifi from the 70s to listen to records. It's one of the only things I have that was his, so it has a lot of sentimental value to me.

load more comments (4 replies)
[-] JayDee@lemmy.ml 19 points 11 months ago

In terms of things passed down, I have the original Wii my parents bought for us on Christmas of 2008. In terms of consoles, I have a Nintendo 64 I got off eBay to play the collection of cartridges we had been accruing since the late 90s.

As for the oldest antique item, I have some mechanical slide calculators, two from Australia, one from Japan, and one from the US. No idea the exact years of manufacturing, but the US one is a Tasco Pocket Arithmometer, which I think ceased manufacturing in the early 1900s ( it's been a bit since I last researched it.)

load more comments (2 replies)
[-] smay@lemmy.smay.dev 19 points 11 months ago

I still use a nearly 20 year old DSLR as my primary photography camera. It’s all personal stuff so the lower resolution and overall lower quality compared to modern cameras doesn’t bother me much. The battery isn’t doing so well after 20 years though, so I’m getting a couple new ones and a larger memory card for it. Hoping to buy a new camera soon and get at least 20 years out of that too, but I still plan to use my current one alongside any other camera as I really like the look of the images it produces.

load more comments (2 replies)
[-] Guster@lemmy.world 19 points 11 months ago

Gameboy Color with 1st gen Pokemon still running strong

load more comments (3 replies)
[-] Kadaj21@lemmy.world 19 points 11 months ago

I’ve got an old iRiver mp3 player thats still ticking (as soon as you pop a AA in it. Would play enough music for me and can plug it in via mini USB I believe.

load more comments (3 replies)
[-] JoMiran@lemmy.ml 17 points 11 months ago* (last edited 11 months ago)

My original Atari 2600 and games I got as a kid.

EDIT: I am pretty sure my stove is from the 60's but it came with the house I bought in 2015, so I am not sure it counts.

load more comments (3 replies)
[-] NGC2346@sh.itjust.works 17 points 11 months ago

IBM PS/1

Proud as fuck, as it's my first pc. I'm 26

[-] christophski@feddit.uk 17 points 11 months ago

My Aiwa P22 micro hifi from 1978. Very nice, compact and sounds great.

[-] Yerbouti@lemmy.ml 17 points 11 months ago* (last edited 11 months ago)

Not that old but my 2009 i5 750 can still rock most of the games at a solid 1080p. I added a fan and overclocked it to 3.6, some ram and a 1060 gpu. It now serves as our main streaming / gaming computer on the TV and shows no sign of giving up. Overall I've spent less than 650$ over 15 years on a computer that we use daily.

load more comments (2 replies)
[-] quams69@lemmy.world 16 points 11 months ago

Commodore 64 but for everyday stuff my Alienware X51 R3 is a weird, old Frankenstein monster

load more comments (1 replies)
[-] Rocketpoweredgorilla@lemmy.ca 16 points 11 months ago

I have a Panasonic "Genius" microwave from 1983, still going strong.

A multimeter from the 70's, although I don't use it often anymore (I have two newer ones)

A Back and Decker b-100 corded drill from the 1960's with a skill saw of the same era. (Both backups in case my newer ones die.)

Also not really tech, but A scythe from the 1930's, an old clothes iron from the early 1900's (The kind you heated on the stove) a machete from 1920, and a couple old hand pump sprayers from the 20's or 30's (The type you screw a glass bottle onto) that all are functional but mainly just collect dust.

I probably have some other old crap I'm not thinking of at the moment, I just like collecting weird old things.

load more comments (2 replies)
[-] fat_stig@lemmy.world 16 points 11 months ago

I have a GeForce GTX 970 from 2015 that's still doing sterling service every day in my recently refreshed HTPC, delivering 4K movies and the occasional game to my 65in Sony OLED TV. My best tech buy ever.

load more comments (3 replies)
[-] SynAcker@lemmy.world 16 points 11 months ago

A 1930s era Sunkist Juicer. That thing is still chooching along and just juiced enough key limes for two pies last night.

load more comments (1 replies)
[-] Thalestr@beehaw.org 15 points 11 months ago* (last edited 11 months ago)

I have several of the original Philips LED replacement bulbs, which were some of the very first LED bulbs available. Paid about $35CAD each for them in late 2009 and they're built out of solid metal and weigh a ton. They're still going strong and put out a lovely light.

load more comments
view more: next ›
this post was submitted on 25 Dec 2023
391 points (98.8% liked)

Asklemmy

44128 readers
416 users here now

A loosely moderated place to ask open-ended questions

Search asklemmy 🔍

If your post meets the following criteria, it's welcome here!

  1. Open-ended question
  2. Not offensive: at this point, we do not have the bandwidth to moderate overtly political discussions. Assume best intent and be excellent to each other.
  3. Not regarding using or support for Lemmy: context, see the list of support communities and tools for finding communities below
  4. Not ad nauseam inducing: please make sure it is a question that would be new to most members
  5. An actual topic of discussion

Looking for support?

Looking for a community?

~Icon~ ~by~ ~@Double_A@discuss.tchncs.de~

founded 5 years ago
MODERATORS