[-] ChamelAjvalel@lemmy.world 14 points 3 months ago

In a really twisted way, Youtube is a fairly big reason why a good number of people go outside, take up hobbies, etc.

[-] ChamelAjvalel@lemmy.world 8 points 3 months ago

There are very very few entertainers that have ever choked me up, but damn Richard Simmons and Newhart are definitely on that list. Rest well.

14
submitted 3 months ago* (last edited 3 months ago) by ChamelAjvalel@lemmy.world to c/cooking@lemmy.world

Welp, I am pleasently surprised. Other than my legs hurting like mad, it really wasn't that difficult to make.

Unfortunately, the past two months my taste has been extremely erratic, so I can't say how this tastes, other than very beany (but I do know it should taste just fine. I've made gorditas with this same sweet bean paste for at least two years now. Tested with the wife, though, and the cinnamon I added is what is the strongest flavor).

As for the mayocoba beans, they were the best for making sweet paste that I could reliably find around our little city.

As for the recipe. Meh, there's nothing really to write down. I have never been a heavy sugar eater, and these health issues have made eating lots of sugar a bloody pain in the arse. So I added just enough sugar...(maybe, as I really can't taste the sugar right now. So I guessed, HAH!). A wee bit of cinnamon, and a pinch of salt.

Now, as for the mochi, I did follow a recipe I found on youtube. (https://www.youtube.com/watch?v=RzfKNUL78pY)

12 oz. Water
8 oz. Sweet rice flour
4 oz. Sugar

mixed the mochi in a skillet, let it soak for a bit and rolled the sweet bean paste into balls, fried on medium heat, then low heat, then placed onto a pile of cornstarch, and went from there.

It really didn't stay as hot as I was afraid it was going to be. The bean paste could have used a light freeze/chill, or drying as most of it was too sticky to form the mochi. Plus, I should have made a slightly larger batch, as I tried to thin the mochi up which tore on several of them. Meh, live and learn.

I wish I could taste them to their fullest, but meh, it's my fault for trusting a doctor, HAH!


Just adding this an hour later to show how bloody erratic my taste is. Now the bean flavor is extremely faint and the sugar is very very strong. Now it's almost sickly sweet, πŸ™„, and I know I didn't add that much sugar to the bean paste.

14
submitted 3 months ago* (last edited 3 months ago) by ChamelAjvalel@lemmy.world to c/lemmy_stitch@sh.itjust.works

I keep forgetting about the Lemmy groups, and my health sucks, so this post is just trying to make my addled brain remember these groups, heh.

Anyhoo, this project is for my elder son (if anyone remembers the Vault Boy one I made for my younger son a few months back), and I'm attempting a few new tricks.

  1. I stapled this monks cloth to a painting frame. It does look like I'll need to do some tightening once I'm done, though. So I hope I can figure that out.
  2. I painted the outside, eyes, and mouth, and I do like how the mouth and eyes make the fabric pop.
  3. I found a larger needle that came with a kit on one heck of a sale at Hobby Lobby, and that is what I'm using. However, it is a tad too large for the yarn I got. So quite a bit of it looks rather frazzled, :thinking:.
  4. And I'm attempting (all-be-it a poor one) flow. (I have no idea what the proper term would be, heh, but it's where the thread leans in one direction, or flows along a line so each row...erm...flows with every other row. (Oof! Well hopefully you can understand that gibberish, HAH).

Meh, regardless of the issues (and boy can I not draw worth snot) it still looks pretty darn good. Now for the body...:grimacing:...The proportions are just a tad off, but it'll have to do.


woops! Guess I didn't post about the Vault Sweet Vault here...Well, here's that one.

28

I've been using one of the Pandora services, but I've been getting a little annoyed with the stations (which I presume I would get the same annoyance from other services, too). So I'd like to be able to create a station and add songs that I own and that wouldn't normally be in that station. (And I know you can add artists to the stations, but some artists only have a few songs I like, and I surely don't want the station inundated with similar artists of the music I don't like. Shudder the thought, 😬 ).

66
submitted 7 months ago* (last edited 7 months ago) by ChamelAjvalel@lemmy.world to c/lemmy_stitch@sh.itjust.works

First time doing an odd shaped fabric thingy, so the edges aren't too great. Plus, didn't figure out a better method of punching around the outlines til close to the end...Meh, still makes us all giggle like school children, heh.

Oh, if anyone knows of a video tutorial on folding over, shaping, and gluing monks cloth with odd shapes (i don't have this issue with softer fabrics)...I'd be so thankful, heh. I just could not get it to work, so I just gave up and rubbed marker over the edges.


Forgot to mention what I used.

Lavor needle with the largest needle in the package.
The black yarn is sport weight "I Love This Yarn" (the maximum this needle could handle).
The white is an unknown we had in our stash, and a faint thinner than the black.
Artiste Monks cloth, 1yd x 62in. (unknown thread count, purchased from Hobby Lobby).


And here is the frame I made.

This is the second frame I made, and since I used my table saw to cut the dowel, it left a large gap, to which I used the jute as a means to grasp onto the cloth. However, it was partially intentional as I wanted to put more into the dowels holding onto the sides of the fabric over the center parts.

The only real problem I had with it was the dowels. It's not easty gripping and twisting to tighten the fabric down. I much prefer the square ones I made on my first model. They offered a much better grip for tightening. Once I feel up to it, I'll make a couple for this one, but they'll have to be thinner than the first model. Which might not be possible. Hmm! Still haven't decided on what I'll do yet.

[-] ChamelAjvalel@lemmy.world 6 points 8 months ago

Man, I need to try to see if my anxiety would let me watch this. I loved the original, and I'd like to see how this one handles the pheasant episode. That's one of the few parts I can remember vividly. I'd really like to see if it's as gut wrenching as the first time.

[-] ChamelAjvalel@lemmy.world 10 points 8 months ago

Well, if "media" is in general, I'd have to say television. I'll watch some things once in a while, but for the most part, I have way too much anxiety from a bad marriage. Audio books, and certain Youtube channels can trigger it, too.

[-] ChamelAjvalel@lemmy.world 16 points 8 months ago

Spaghetti carbon-era would work, too.

24
submitted 8 months ago* (last edited 8 months ago) by ChamelAjvalel@lemmy.world to c/cooking@lemmy.world

He put lemon in the coconut (milk)
He fried the shrimp up
He put lemon in the coconut (milk)
He fried the shrimp up
He said, "Honey, I have but one little wish".
He said, "honey, for you to try this little dish".
He said, "Honey, taste this tiny shellfish."
He said, "Honey, C'mon try this little dish".

Aaaaaand, that is pretty much the only reason I wanted to post this, πŸ˜‚. I think I pulled something laughing so hard when it came to me. 🀣

Anyway, it is really good. Like really really good.

10 small shrimp, deveined.
1/4 c. The thick coconut cream on coconut milk.
1 tsp. Lemon juice.
1 clove crushed garlic
pinch of ground ginger
a large handful of Rao's Fusilli noodles.

cook noodles then cool and set aside. Keep 1/4 cup of the noodle water.

fry shrimp in a tablespoon of coconut oil til well cooked. Add in coconut cream, ginger, and garlic. Cook for about a minute or two. Add in noodle water. Cook for about two minutes. Toss in noodles, add salt and pepper and continue cooking for two to five minutes, til thickened.

Why did I mention coconut cream? Well, because of this milk

It had a large chunk of cream on the top, and I didn't think about checking for it, heh. However, it was awesome, and worked beautifully. So why not add that bit of info? 😏

52
[Recipe] Lamb Pie (lemmy.world)

And just in case the link doesn't work again, πŸ™„ , https://forum.lettucecraft.com/t/rosemary-lamb-pie/28337

Oof! Quite pained from making this, but meh, I'm in pain all the time anyway, 🀣 🀣 🀣 .

Anyway, this is quite good, and I do think I should have added a wee bit more liquid to it before baking, but meh, not a problem, heh.

[-] ChamelAjvalel@lemmy.world 5 points 8 months ago

but it's been at least a couple of weeks since cast-on which should tell you all you need to know about rate of completion πŸ˜…

Pshhh! That's nothing. I've got a grocery bag that I started over a year ago, and a pumpkin bag I started about 7 months ago...i swear I'll get to them...after I find where I put the patterns I wrote...:no_mouth:

Definitely requires a bit more concentration than I've been able to give lately, so I just keep defaulting to the socks instead.

Oof! Pain and the digestive issues from trying to get my pains taken care of have me in a daze most days. It's tough, but I am making headway...slooooowly, heh!


Am working on another duster for my swiffer thingies...I still don't feel up to recording a how-to yet, though. I'll get to it...i'll get to it.

Last night, I made a tiny ray out of this yarn, too.

27
submitted 8 months ago* (last edited 8 months ago) by ChamelAjvalel@lemmy.world to c/cooking@lemmy.world

Huh! This is actually good.

Oat pancakes

Blend dry ingredients together.

1/2 c. Flour
1/2 c. Oat flour
1/4 c. Buttermilk powder
1 tsp. Baking powder
1/2 tsp. Baking soda
Pinch of salt

Date water

in a small sauce pan, boil 5 medjool dates with one cup water til the skins fall off. Take out all but two dates, and blend the dates and water til smooth. (note: you only really need two dates...Uh, I wanted to eat them after boiling, so I wasn't even planning on making the rest, heh. That just happened as I really wanted to use the water in something).

(Substitute the date water with 1 Tbls. sugar and 1 c. water if you don't want to use dates)

mix well date water, two tablespoons melted butter, and one egg into the dry ingredients.

cover and let sit for 15 to 30 minutes.

make pancake.

Spiced Cherry Sauce

(unfortunattly, no real recipe, but I bet the measurements will be close enough).

in a sauce pan, mix and heat

1 c. Cherries
2 Tbls. Water (add half a teaspoon at a time if you need more water)
2 Tbls. Sugar (add 1/4 cup or more if you want it sweeter).
Pinch of salt
1/2 tsp. Cinnamon
Pinch of ground clove

Cook over medium low heat til the cherries fall apart and the sauce thickens.

For the cherries, I used Great Value frozen cherry medley.

i did the dumb thing of trying to separate the skins from the pulp...Tlagwv osdi vsgi yigesvna (Cherokee: That was not that great). It took about three times as long to Thicken. Pshew! Also, was completely unnecessary as the mash tastes just as good as the sauce, Meh, was curious, and that curiosity was...erm...sort of satisfied. Heh!

22
Tiny Knitted Rays (m.youtube.com)
submitted 8 months ago* (last edited 8 months ago) by ChamelAjvalel@lemmy.world to c/knitting@lemmy.world

Just finished the video, which is crap, buuuut is good enough, heh.

(my wife made this on her phone, and I just love it, heh).

Cast on 4 stitches.

  1. kfb S2 wyif move yarn to back, slip last slipped stitch to left needle. Knit in the front of the last stitch on the left needle, slip stich, knit in the back.
  2. kfb ( K1 S1 wyif )2 kfb
  3. kfb K1 ( K1 S1 wyif )2 K1 kfb
  4. kfb K2 ( K1 S1 wyif )2 K2 kfb
  5. kfb K3 ( K1 S1 wyif )2 K3 kfb
  6. kfb K4 ( K1 S1 wyif )2 K4 kfb
  7. kfb K5 ( K1 S1 wyif )2 K5 kfb
  8. K7 ( K1 S1 wyif )2 K7
  9. K3tog K4 ( K1 S1 wyif )2 K4 K3tog
  10. K2tog K3 ( K1 S1 wyif )2 K3 K2tog
  11. K2tog K2 ( K1 S1 wyif )2 K2 K2tog
  12. K2tog K1 ( K1 S1 wyif )2 K1 K2tog
  13. K2tog ( K1 S1 wyif )2 K2tog
  14. Reorder stitches (From left to right) as follows, 5,3,6,4,2,1

(Realized a little late that 5 & 3 could be knitted together before moving the stitches to the right needle, and would move the yarn to the left side for starting the I-cord knitting, but yeah, you can do that. If you don't do that, then just change the K1 in row 15 to K2tog).

  1. K2tog K2tog K1
  2. K3
  3. K2tog K1
  4. K2 Repeat 18 to the length of tail you want.

Pull tail through remaining two stitches. Sew in ends.

Notes:

Reorder stitches (From left to right) as follows, 5,3,6,4,2,1

WIthout using the tail, slip the first two stitches, slip the next stitch onto the front of the right needle, slip stitch, slip the last stitch from the left needle. Slip the first stitch from the right needle onto the left needle. Turn the left needle and knit those two stitches together through the back. (The video will help with this).

Added times to jump to different parts in the video description.

Ok! Hopefully that's all good...enough...

(and to make sure Lemmy or Connect doesn't remove my link, here it is in text form https://m.youtube.com/watch?v=zzwqjmdkNd4...And Lemmy/Connect kept this link after posting...So I guess I don't need this...But I'll leave it down at the bottom anyway).

38
submitted 8 months ago* (last edited 8 months ago) by ChamelAjvalel@lemmy.world to c/cooking@lemmy.world

Just made/created this for my wife. It still gets below freezing, so I'll pop this into her truck tonight after she goes to bed tonight. Will be a nice surprise when she leaves for work tomorrow morning, 😊

One slight little hiccup, it seems like it's a bit too soft, but it just may need to rest in the fridge for much longer. I just wanted to get it ready before she got home. Meh, she'll still like it any way.

Jesus! Thought the recipe was linked...welp, here it is again.

Caramel Swirl Fudge

[-] ChamelAjvalel@lemmy.world 6 points 9 months ago

I'm rather curious about this, too.

I'll chime in with what I've personally dealt with.

Both Aroma brand

Glass lid, metal cooking pan has a lip that rolls outside of the heating base. Just a simple switch, cooking & warm. Does boil over once in a while, and fairly small...ease of cleaning, really really easy.

Enclosed unit, has a metal pan that goes inside and a steamer basket, has a removeable metal top to clean...haven't had it for long, but I can imagine the seals will deteriorate and make it not as long lasting as the other pan...However, those seals do make cleaning more difficult.

15

I made a syrup from ground black walnut and sunflower seeds, but boy is it overly sweet. I do know I could use some form of flour (qinoa, amaranth, millet, all purpose, corn meal, corn starch, etc), but I'm curious if anyone might know of something I haven't thought of yet.

[-] ChamelAjvalel@lemmy.world 4 points 9 months ago* (last edited 9 months ago)

I've had ideas for cambrian knits for a looooong time, heh. Bad marriage, getting cussed out by a son for knitting, and chronic pains have made thinking loads of fun, yeesh, but I have made enough to know it's very much possible.

3 sizes of trilobites (and, unfortunately the only pattern I was able to finish and publish, but I do need to record a video on attaching the heads).

Ammonite (Almost had it finished oh so long ago. Luckily, I do remember the important parts of making it).

Also, I've had halucigenia and other Xenusiids in mind, crinoids, tullymonstrum, and opabinia as well. I did have an idea for writing a larger anomalocaris, but it turns out someone was ahead of me, hah.

Unfortunately, it'll be a miracle if I can ever finish any of them...My deltoid and bicep can hurt immensely with the small movements while knitting.

9
submitted 9 months ago* (last edited 9 months ago) by ChamelAjvalel@lemmy.world to c/knitting@lemmy.world

Hmm??? Still a bit leary on the fins. (Here's the first iteration using a plastic bag for the fins).

Logically, the furriness shouldn't be an issue and only minutely add to their hairball formation...but, it still makes me feel a bit uneasy.

Eh, I don't have any old clothes, nor any ribbon large enough on hand...so just used what I could find that'd be different for the time being. Pppppp!

Meh, once I figure out something for the fins that I feel comfortable with then I can finalize the patterns (anomalocaris, goldfish, ammonite, and a squid).

[-] ChamelAjvalel@lemmy.world 6 points 11 months ago* (last edited 11 months ago)

First issue I found, I needed to add a little water to the mixture so it would keep from pulling up the dirt as I tried to spread it on. Made it so I could just pour it over. Wtich means two things, I'll see how moisture reacts to it, and have to wait maybe two days for it to dry...which, if so, might make it really difficult in that I'll have to fill the unit with dirt before we move it (and it is quite heavy without the added dirt).

Update:

Well, I'll be damned. I used a heat gun and it dried up within seconds...Everything is back on schedule again, πŸ˜ƒ

47
submitted 11 months ago* (last edited 11 months ago) by ChamelAjvalel@lemmy.world to c/asklemmy@lemmy.world

Ok! I give up trying to find this stuff on my own, heh.

Anyway, I built my wife a large outdoor miniature diarama for Christmas and I'm wanting to do a winter theme for her opening (the door), and I'm rather stumped on these.

So far, the best solution I found was snow powder/flakes and spray on adhesive, but I'm definitely open to something else (that's not overly costly, πŸ€·β€β™‚οΈ. I spent a looooot on this so far).

It will have a dirt base, so the snow needs to adhere to that as best as possible.

[-] ChamelAjvalel@lemmy.world 5 points 1 year ago* (last edited 1 year ago)

God! Which one to choose?

The electrical company that let a drunk work because "he had 20+ years of experience", which was rather dubious...

Or furniture retailers that had delivery drivers...read that again delivery drivers, drive drunk/stoned/coked out, and they were well aware they were.

Or people trying (Eh, let me be a little more specific...People certifying drivers) to drive in careers where people with mental issues should not be driving...(One guy I knew drove onto the shoulder chasing an oversize load with two bicyclers. He missed them, but god damn)...

Or my entire fucking family who don't realize I'm getting bad at driving, and expect me to drive regardless that I might get somebody hurt...(I get a lot of flack for that).

view more: next β€Ί

ChamelAjvalel

joined 1 year ago