I follow this person already for a while, very interesting things he come up with

For work in Malawi I am thinking of introducing a bricket press to make brickets from biomass. One person must pull a lever and a piston is pressing biomass into a cylinder and compresses it. The end of the stroke should be stronger and less fast. And with returning of the lever the pressed bricket or pellet is pushed out and new biomass is inserted. It can be an interesting design from scratch and nice context? It would be challenging to make it convenient for the person while large pressing forces are reached (5000n)

I tried the same with a low cost grill iron ( to make sandwiches 🥪). With back in my mind that I not would buy another one but fix this one once it should break. The hinge broke and a few tabs that hold oneside metal in place. I glued it but after two weeks the it broke on another place. Could not live without tosties, have now a newer bigger one...I've tried...

Indeed, the man is painting the grass green.

It is an interesting these technologies you compare. Yes, a sand battery is in potential capable of storing higher temperatures if the source can generate these temperatures. We also have to look at the heat transfer that will seperate both energy buffers if seen from an application point of view. The heat transfer in sand is very low and this intrinsic insulation of sand begins to be very interesting when larger volumes are used. Water has a problem that it needs an extra insulation layer and larger volumes would be less interesting in comparison. However water is faster in exchange and is interesting as smaller buffer with shorter bursts and intake of heat.

Nice to see another project of you. I'll post my chicken coop project in near future as well

Glad to be of help. I think you can get away with a 12v pump as most panels of this power range are made for 12/24v. I suggest very simple centrifugal submergable pump with a bit of filtering around it and direct connection to panel. No inverter or battery, that would be way overkill in my opinion.

As an example case, if you need to pump from the pond nearby, 2m height difference and pump 0,25liter per second. ((0,25 *2 *9,81)/0,35)*1,33 = 18,6W ->20wp panel. I did not take into account the hose size butn0,25liter per second is not a lot. And every meter height difference added will add an extra 10W to the panel

I perhaps can help you with this. I'm working in a company that is helping smallholder farmers over the world to increase their crop yield. We used to start with a small hydropowered waterwheel but moved to solar due to the reach of the sun. I am the technical person that is sourcing pumps, solar panels, inverters etc for irrigation.

So far as I can read your question you don't need a lot of water and also not a lot of pressure. It is quite easy to calculate.

• Hydraulic power need (W) / efficiencies = electric power requirement (W)-> *1.3 = solar panel (Wp)

• Hydraulic power = 9,81 * height differencence of water (m) * liter per second you want to pump

• Efficiencies = centrifugal pumps are approx 35% eff so (hydraulicp/0,35) *1,33= panelsize

• halve a liter per second is sufficient for halve an acre (2020m2) of crops.

Please if you have more questions I would glad to be of help

The summary pictures below

Nice to see / read. The super glue trick is nice to know. I also wanted to mention that the collection of pictures on the bottom is broken when you open them on movim.slrpnk.net

Good job @hamtron5000, you need to place the cats somewhere 😁. We also built a cat collector last month. The trick with us was the stovepipe that did not allow combustables nearby so the pathway is very small for the cats