19
Initial steps with OPNSense (lemmy.world)
submitted 8 months ago by skipmorrow@lemmy.world to c/selfhosted@lemmy.world
10 comments fedilink hide all child comments

I am going to build a router with OPNSense (in Proxmox, on an HP thin client). I am stuck with setting up the networking (I have the Inel 4-port card). I don't really know how to get started. Right now my device has one LAN cable going into it, and my consumer router is doing everything. I can set up a bridge for the other ports, but what IP address will I use for the LAN? I can't use 192.268.0.1 because that will collide with my consumer router. Do I just take my consumer router offline while I am setting this up?I'd rather not because for sure I will get stuck and will want to look something up online. I guess I could use my phone but not the best when I am trying to see someone setting up something like this.

Silly question, I know, but I just can't think of a clean way to get this going with minimal disruption. In a nutshell, what's a good strategy for setting up and testing the OPNSense while it's not actually doing any routing and then seemlessly drop it in and start working on it?

you are viewing a single comment's thread
view the rest of the comments
[-] skipmorrow@lemmy.world 1 points 8 months ago

Let's see if I got this... great idea to disable DHCP on the new OPNSense for now. I forgot about that. Just keep the one LAN cable going in, and I will just keep the IP address as it is right now (.79). Not even worry about the WAN port at all. Set up all of the features, including things like reserved IP addresses and whatnot. Then, when I am ready to drop it in, I will turn the old router off, and on the new router set up a static IP on the LAN port (.0.1) and add the WAN port (DHCP). Drop it in place, turn on DHCP and I'll be good to go.

[-] theit8514@lemmy.world 4 points 8 months ago

Sounds about right, just be aware that your LAN and WAN networks need to be different, so you'll likely need to change your old router's dhcp subnet. E.g. 192.168.1.1/24 on the WAN and 192.168.0.1/24 on the LAN.

[-] reddthat@reddthat.com 3 points 8 months ago

Yep. Keep the WAN port dhcp Client enabled if you can, just one less thing to worry about.

Also take note that when you change the static IP of the new router it would conflict with the old one (and dhcp might fail). So you might need to set your local clients IP. Take note of the configuration it has and the steps to set it manually.

The rest all sounds right.

this post was submitted on 05 Jan 2024
19 points (100.0% liked)

Selfhosted

39266 readers
686 users here now

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.

Rules:

  1. Be civil: we're here to support and learn from one another. Insults won't be tolerated. Flame wars are frowned upon.

  2. No spam posting.

  3. Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it's not obvious why your post topic revolves around selfhosting, please include details to make it clear.

  4. Don't duplicate the full text of your blog or github here. Just post the link for folks to click.

  5. Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).

  6. No trolling.

Resources:

Any issues on the community? Report it using the report flag.

Questions? DM the mods!

founded 1 year ago
MODERATORS
ruud@lemmy.world
CannaVet@lemmy.world
Loki@lemmy.world
HybridSarcasm@lemmy.world
devve@lemmy.world
HybridSarcasm@lemmy.hybridsarcasm.xyz