I don't know what your access to Xbox parts is like, but an Xbox Kinect can be used for this with a simple USB adapter that connects to a laptop.
Wow tjeubare cheap now.
Ill gove that a try
Use a Xbox 360 Kinect and Skanect software. You'll need a power/USB adapter for it
I built one probably over 10 years ago now. Worked well enough to scan and print my head, but I had a lot of stitching to do on the file. Was still pretty blown away though. I can’t seem to find a photo of it right now, but I’ll post it if I dig it up later.
Doubt it would be super accurate for small things though.
Found the file, can’t find the photo of the print though.
It's absolutely not accurate for small objects. I had a few laying around and was interested in making one but didn't bother until a coworker asked me to print out a custom part for one of his Gundam models. I threw it together (using the better XBOne Kinect) and tried to scan the 4" tall Gundam and just got a little blob regardless of which method I used to scan (both rotating the object or rotating the Kinect around the object). I think it would definitely be more useful for something like OPs project or scanning something much larger.
I also used the 360 Kinect to build a kinetic sandbox which operates on the same principle but without the same output and that worked really well.
Have you used blender at all? It has some photogrammetry .
I’m not sure it’ll be even close to precise, but, it’s a start.
Ive used it alot. But far feom expertly
But not seen that. Likely cos I have never looked :)
Ill have a look at it. Thanks.
There's Meshroom. You just give it the photos and it contructs a 3D model from them. Since it's FOSS, it works on Linux.
Do you have an iPhone or any phone with lidar built in? It's been a while but I recall it being an option for scanning, make use of tools you already have. I'm not sure what exists for Foss related apps though sorry, and afaik they're not super accurate (dedicated scanners can get <0.01mm resolution from what I've seen but they're expensive) but if your goal is layout that'd do the trick in my view. Heck, as you said, camera scanning would work, there'll be cleanup but should be good enough to get you dimensions.
Another thought, could check with local makerspaces or the like, totally possible they may have scanners you could use, or could put you on the right track. Diy wise, kinects as mentioned, I'm not experienced with these but there are photogrammetry tools, micmac could work, there's meshroom but that needs some compute hardware and COLMAP could also be worth looking into
Edit: Photogrammetry is decently accurate afaik, recall sitting in a tech meeting at my last job where the process engineers from the material handling department presented a poc they did with some cheap drones and cheap cameras, they did a fly over of the pier to scan ore piles and apparently were able to get fairly accurate weight estimates from the photogrammetry results, which was really cool to me.
Ibdont. My brother dose.
So im going to give meshroom a try with my android phone.
If that dont work ill get my brother to come up to the boat.
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible